Simpson Strong-Tie AT-XP13 Fast-Curing Acrylic Anchoring Adhesive

• Includes AMN19Q nozzle

Formulated for high-strength anchorage of threaded rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions, AT-XP adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge. When mixed properly, this low-odor formula is a dark teal color for easy post-installation identification.

Key Features

• Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads
• Code listed under the IBC/IRC for cracked and uncracked concrete per IAPMO UES ER-263 and City of L.A. RR25960
• Code listed under the IBC/IRC for masonry per IAPMO UES ER-281 and City of L.A. RR25966
• AT-XP is code listed for installation with the Speed Clean^™ DXS system without any further cleaning (AT-XP: IAPMO-UES ER-263)
• 10:1 two-component high-strength, acrylic-based anchoring adhesive
• Suitable for use under static and seismic loading conditions in cracked and uncracked concrete as well as masonry
• Easy hole-cleaning procedure — no power-brushing required
• Suitable for use in dry or water-saturated concrete
• For best results, store between 14°F (–10°C) and 80°F (27°C)
• Cures in substrate temperatures as low as 14°F (–10°C) in 24 hours or less
• Available in 9.4 oz., 12.5 oz. and 30 oz. cartridges for application versatility
• Volatile Organic Compound (VOC) – 30 g/L
• Manufactured in the USA using global materials

Applications

• Concrete Block: Grouted
• Mass Timber / Cross-Laminated Timber
• Concrete Block: Hollow (Ungrouted)
• Seismic (New Construction)
• Concrete: Cracked
• Water / Wastewater Facilities
• Seismic Retrofit