Simpson Strong-Tie CIP-LO22 Low-Odor Crack-Injection Paste-Over 22 oz. Cartridge
Crack Repair Accessories
CIP-LO is a low-odor, fast-curing epoxy paste-over used to seal cracks and secure injection ports at the surface of concrete substrates prior to implementing an epoxy or urethane foam injection repair. When properly mixed, the product will be a uniform gray color. CIP-LO sets up rigid. When the crack repair is complete, the paste-over may be left in place or else ground or chiseled off the concrete substrate.
Key Features
- 1:1 two-component, high-solids, epoxy amine based adhesive
- Non-sag paste consistency for horizontal, vertical or overhead applications
- Fast cure times for shorter times between paste-over and injection
- Low-odor formulation
- Strong substrate bond; requires chipping to remove
- Gel Time — 6 minutes at 72°F (22°C), 28 minutes at 40°F (4°C)
- Cure Time — 75 minutes at 72°F (22°C), 2 hours at 60°F (16°C) and 4–5 hours at 40°F (4°C)
- Volatile organic compound (VOC) — 4 g/L
- Manufactured in the USA using global materials
Applications
- Crack Repair: Structural
- Crack Repair: Non-Structural
- Water / Wastewater Facilities
Included Parts
- EMN22i - One mixing nozzle included with CIPLO22 model
Specifications:
Model No. | Option | Packaging Qty. | Carton Qty. | Compatible Tools |
CIPLO22 | Low-odor crack-injection paste-over, 22 oz. cartridge | 1 | 10 | EDT22S, EDTA22CKT, EDTA22P dispensing tools / EMN22I mixing nozzle (included) |
CIPLO2KT | Low-odor crack-injection paste-over, 2 gal. kit | 1 | 1 | – |
Storage Conditions
- For best results, store between 45°F (7°C) and 90°F (32°C)
Shelf Life
- 24 months from date of manufacture, unopened
Installation
- Apply to concrete 40°F (4°C) or above. For best results, warm material to 65°F (16°C) or above prior to application.