Simpson Strong-Tie SET-XP56 56oz. Cartridge SET-XP Anchoring Adhesive
Epoxy Anchoring Adhesives
SET-XP is an epoxy-based high-strength anchoring adhesive. SET-XP is a 1:1 ratio, two-component anchoring adhesive for anchoring and doweling into concrete (cracked and uncracked) and masonry (uncracked) applications.
Key Features
- Design flexibility — permitted for sustained load performance at elevated temperature
- Jobsite versatility — can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 150°F (65°C)
- Recognized per AC308 to be used for rebar development and splice length design provisions of ACI 318
- Code listed for installation with the Speed Cleanâ„¢ DXS system without any further cleaning
- Easy hole-cleaning — no power-brushing required
- Manufactured in the USA using global materials
Mix Ratio/Type | 1:1 epoxy |
Mixed Color | Teal |
Base Materials | Concrete — cracked and uncracked Masonry — uncracked |
Base Material Conditions | Dry, water-saturated |
Anchor Type | Threaded rod or rebar |
Substrate Installation Temperature | 50°F (4°C) to 110°F (38°C) |
In-Service Temperature Range | -40°F (-40°C) to 150°F (65°C) |
Storage Temperature | 45°F (7°C) and 90°F (32°C) |
Shelf Life | 24 months |
Volatile Organic Compound (VOC) | 3 g/L |
Applications
- Concrete: Cracked
- Concrete Block: Grouted
- Concrete Block: Hollow (Ungrouted)
- Seismic (New Construction)
- Seismic Retrofit
- Water / Wastewater Facilities
Included Parts
- EMN22i - One nozzle and extension included with SET-XP10 and SET-XP22-N
Model No. | Option | Packaging Qty. | Carton Qty. | Compatible Tools |
SET-XP10 | 8.5 oz. single cartridge | 1 | 12 | CDT10S dispensing tool / EMN22i mixing nozzle (included) |
SET-XP22-N | 22-oz. side-by-side cartridge | 1 | 10 | EDT22S, EDTA22P, EDTA22CKT dispensing tools / EMN22i mixing nozzle (included) |
SET-XP56 | 56 oz. side-by-side cartridge | 1 | 6 | EDTA56P dispensing tool / EMN22i mixing nozzle (not included) |
Applications
- Threaded rod anchoring and rebar doweling into concrete and masonry
- Recognized per AC308 to be used for rebar development and splice length design provisions of ACI 318
- Suitable for horizontal, vertical and overhead applications
- Multiple DOT listings
Installation
- Surfaces to receive epoxy must be clean.
- Base material temperature must be 50°F (10°C) or above at the time of installation. For best results, material should be between 70°F (21°C) and 80°F (27°C) at time of application.
- To warm cold material, store cartridges in a warm, uniformly heated area or storage container. Do not immerse cartridges in water or use microwave to facilitate warming.
- Mixed material in nozzle can harden in 30 minutes at temperatures of 70°F (21°C) and above.
- Use only appropriate Simpson Strong-Tie mixing nozzle in accordance with Simpson Strong-Tie instructions. Modification or improper use of mixing nozzle may impair SET-XP adhesive performance.
- For full instructions, see Adhesive Anchoring Installation Instructions.
Test Criteria
- SET-XP has been tested in accordance with ICC-ES AC308, AC58, ACI 355.4 and applicable ASTM test methods.
Cure Schedule
Base Material Temperature °F | Base Material Temperature °C | Gel Time (mins.) | Cure Time (hrs.) |
1. For water-saturated concrete, the cure times must be doubled. |
50 | 10 | 75 | 72 |
60 | 16 | 60 | 48 |
70 | 21 | 45 | 24 |
90 | 32 | 35 | 24 |
110 | 43 | 20 | 24 |
SET-XP Typical Properties
Property | Class C | Test Method |
(>60°F) |
Consistency | Non-sag | ASTM C881 |
Bond Strength, Slant Shear | Hardened to Hardened Concrete, 2-Day Cure1 | 2,900 psi | ASTM C882 |
Hardened to Hardened Concrete, 14-Day Cure1 | 3,200 psi |
Fresh to Hardened Concrete, 14-Day Cure2 | 2,000 psi |
Compressive Yield Strength, 7-Day Cure2 | 14,100 psi | ASTM D695 |
Compressive Modulus, 7-Day Cure2 | 612,000 psi | ASTM D695 |
Heat Deflection Temperature, 7-Day Cure2 | 136°F (58°C) | ASTM D648 |
Glass Transition Temperature, 7-Day Cure2 | 126°F (52°C) | ASTM E1356 |
Decomposition Temperature, 24-Hour Cure2 | 500°F (260°C) | ASTM E2550 |
Water Absorption, 24-Hours, 7-Day Cure2 | 0.10% | ASTM D570 |
Shore D Hardness, 24-Hour Cure2 | 84 | ASTM D2240 |
Linear Coefficient of Shrinkage, 7-Day Cure2 | 0.002 in./in. | ASTM D2566 |
Coefficient of Thermal Expansion2 | 2.4 x 10-5 in./in.°F | ASTM C531 |
- Material and curing conditions: 60° ± 2°F.
- Material and curing conditions: 73° ± 2°F.
|
Suggested Specifications
Anchoring adhesive shall be a two-component high-solids, epoxy-based system supplied in manufacturer's standard cartridge and dispensed through a static mixing nozzle supplied by the manufacturer. The adhesive anchor shall have been tested and qualified for performance in cracked and uncracked concrete per ICC-ES AC308. Adhesive shall be SET-XP adhesive from Simpson Strong-Tie, Pleasanton, CA. Anchors shall be installed per Simpson Strong-Tie instructions for SET-XP epoxy adhesive.