GRACO 217022 - Motor, Gh-733, 1500 PSI (10 MPa, 103 Bar)
Motor model with hydraulic oil operating temperature specification
Specifications
- Max Working Pressure: 1500 psi (10 MPa, 103 bar)
- Series Square: E
- Series Cylindrical: F
- Maximum Hydraulic Fluid Input Pressure: 1500 psi (10 MPa, 103 bar)
- Hydraulic Oil Operating Temp: 80 - 115° F (27 - 45° C)
- Max Temp Warning: 130° F (54° C) - check hydraulic fluid supply cooling system, filters, etc.
Compatible Equipment
- GH533 Sprayers
- GH733 Sprayers
- GH833 Sprayers
- Hydraulic systems requiring temperature-controlled operation
Related Parts
Kit Contents
Available in both square housing (Series E) and cylindrical housing (Series F) configurations. Manual states that cylindrical design replaces square housing design previously used, and if replacement of square housing 16F140 is needed, must order replacement housing kit 20B232 to upgrade system to cylindrical housings design. Model 217022 is mentioned alongside 217338 for hydraulic oil working temperature specifications. The motor seals will wear faster and leakage may occur if the pump is operated at higher oil temperatures. If hydraulic oil temperature approaches 130° F (54° C), check the hydraulic fluid supply cooling system, filters, etc. and clean or repair as needed. The ground wire and clamp are supplied with your GH Sprayer. Connect the clamp to a true earth ground as recommended by your local code.
Reference Manuals
