GRACO 222834 - Viscount Hydraulic Motor w/ Dura-Flo 2400 (580 cc) Lower, 3 PTFE/2 Leather Packings, 2000 PSI
The rugged pump lower construction with Severe Duty rods and cylinders reduces downtime and extends the interval between repairs. The simple construction makes service and repair fast and easy. The efficient hydraulic powered piston makes these pumps the ideal choice for factory and outdoor mobile use, even at below freezing temperatures.
- Clean, quiet operation with no airborne contamination
- Up to three times more energy efficient than comparable compressed air systems
- Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
- Reduce routine maintenance and cut repairs time in half of comparable pump lowers
- Eliminate downtime without ice build-up
Additional Specifications
- Max Working Pressure: 14.0 MPa, 138 bar (2000 PSI) maximum fluid working pressure
- Displacement Pump Part No: 222801
- Ratio: 1.33:1
- Maximum Air Hydraulic Input Pressure: 10 MPa, 103 bar (1500 PSI)
- Series: Series B
| Application | Supply |
| Compatible Material | Waterborne, Solventborne, High Solids, Xirallic, CARC, Metallics, Topcoats, Stains, Varnish |
| Fluid Inlet Size (in) | 2 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 1-1/2 |
| Fluid Outlet Thread Gender | Male |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | 2-Ball |
| Material | Carbon Steel |
| Maximum Flow Rate (GPM) | 9.2 |
| Maximum Hydraulic Fluid Inlet Pressure (psi) | 1500 |
| Maximum Intermittent Cycle Rate (CPM) | 60 |
| Maximum Operating Temperature (°F) | 150 |
| Maximum Working Pressure (MPa) | 13.8 |
| Maximum Working Pressure (psi) | 2000 |
| Portable | Non-Portable |
| Pump Ratio | 20:1 |
| Standards Met | ATEX, CE |
| Type | Hydraulic Piston Pump |
| Wetted Material | Carbon Steel |
Compatible Equipment
Related Parts
Kit Contents
- 235345 - HYDRAULIC MOTOR, Viscount, quiet
- 184595 - ADAPTER, connecting rod
- 184096 - NUT, coupling
- 184278 - WRENCH, packing nut
- 222801 - PUMP, displacement
- 106166 - NUT, hex; M16 x 2.0 (3 pieces)
- 184596 - ROD, tie; 315 mm (12.40 in.) shoulder to shoulder (3 pieces)
- 184130 - COLLAR, coupling (2 pieces)
This is listed as a pump model in the List of Models table. The Viscount® pump model 222834, Series B uses displacement pump part no. 222801 with a 1.33:1 ratio. Safety warning: Must use connecting rod adapter 184539 and tie rods 184596 with this model. Never use adapter 184451 and tie rods 184452 as they do not provide sufficient clearance between drip pan and coupling nut. This is a complete pump assembly. Some connection parts are included in Connection Kit 222976 which may be purchased separately. Reference number 308048 mentioned for hydraulic motor parts.
Reference Manuals
