GRACO 226945 - 1:1 Ratio Stainless Steel Fast-Flo Universal-Length Transfer Stubby Pump
Fast Flo 1:1 pumps are designed to operate at air input pressures up to 180 PSI (12 bar, 1.2 MPa) and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount siphon feed applications. Ideal for lower viscosity fluids with plate (flat) check options.
Maximum delivery up to 5 gpm (19 lpm) and maximum fluid working pressure up to 180 PSI (12 bar). Ideal for lower viscosity fluids.
- Air-powered for high reliability and low cost
- Delivery up to 5 gpm (19 lpm)
- Available in stainless steel or carbon steel
- UL options available when installed in accordance with NFPA
Additional Specifications
- Length: 685 mm (27 in.)
- Thread: 1-1/2 in. NPT(F) fluid inlet, 3/4 in. NPT(F) fluid outlet
- Packing Type: polyethylene packed
- Etl Listed: Yes - for light viscosity paints, lacquers, varnishes, thinners, solvents when installed in accordance with NFPA Standards No. 30, Flammable and Combustible Liquids Code, and No. 33 Spray Finishing Using Flammable Materials
- Series: Series B
- Pump Type: Stubby Length Pump
- Overall Length A: 685 mm (27 in.)
- Pump Length B: 250 mm (9.8 in.)
- Fluid Inlet C: 1-1/2 in. NPT(F)
- Fluid Outlet D: 3/4 in. NPT(F)
| Air Inlet Size (in) | 1/4 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Compatible Material | Antifreeze, Asphalt, Windshield Washer Fluid, Motor Oil, Used Oil, Hydraulic Fluid, Oil, Ink |
| Fluid Outlet Size (in) | 3/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Material | Stainless Steel |
| Maximum Air Inlet Pressure (psi) | 180 |
| Maximum Continuous Cycle Rate (CPM) | 100 |
| Maximum Intermittent Cycle Rate (CPM) | 4 |
| Maximum Working Pressure (MPa) | 1.2 |
| Maximum Working Pressure (psi) | 180 |
| Minimum Flow Rate (GPM) | 180 |
| Portable | Non-Portable |
| Pump Ratio | 1:1 |
| Seal Material | Polyethylene |
| Type | Pneumatic Piston Pump |
Compatible Equipment
- Light viscosity paints
- lacquers
- varnishes
- thinners
- solvents
- Stainless Steel Pumps
Related Parts
ETL listed pump evaluated using ASTM Reference Fuels A, C, H, I, and IRM No. 3 Oil. Any fluid used should be reviewed against these fluids to determine suitability. This is a stainless steel pump for corrosives. Parts pages: 15, 28 This is listed as one of the Stubby Length Pumps, Stainless Steel Models. The displacement pump (215958) is only available as piece parts, not available assembled. Part 114 references the displacement pump for Model 226945 specifically and directs to see page 28 for more details. Part of pump family with various length configurations. Shown in left diagram with dimensions A, B, C, and D labeled.
Reference Manuals
