GRACO 262372 - D200S Shot Disp Kit
SmartWare Shot Dispense Kit for D200S pumps with large NXT Air Motor that provides accurate, economical material dosing without flowmeters or gear meters. Uses sensor-based pump position tracking to act like a flowmeter, saving time, material and labor costs through precise dispensing control.
Specifications
- Shot Size Capability: 6 cc's to 3.785 l (1.000 gal)
- Accuracy: Ranges from 0.25 to 4%, depending on material and shot size
- Power Requirements: 110 or 220 VAC
- Manual: 3A0294
- Ram Type: 6 inch dual post ram
- Air Motor Compatibility: NXT2200 and larger air motors
Features
- Accurate dosing without flowmeters or gear meters
- Sensor tracks pump position for flowmeter-like operation
- Saves labour and material costs
- Local Control Module with sequence mode for up to 14 different shot sizes
- Shot mode displays single shot size and communicates amount dispensed
- Linear sensor tracks pump position
Applications
- Cartridge fill
- Potting
- Encapsulating
- Mold making
- Batching or kitting
Compatible Equipment
- D200S with large NXT Air Motor
- DuraFlo or Check-Mate pump with NXT technology (wall-mounted or stand-mounted)
- GRACO Supply Systems (Models: S20, S20c, D60, D200 and D200s)
- Check-Mate pumps
- Dura-Flo pumps
Related Parts
Kit Contents
- Local Control Module
- sensors
- cables
- mounting hardware
Handles wide variety of materials and viscosities from paint to roof tar. Part of comprehensive SmartWare system family. For D200S 6 inch dual post ram with NXT2200 and larger air motors. Part of SmartWare Shot Dispense Kit family. Accurate metered dispensing kit for one component materials. For professional use only. Not approved for use in European explosive atmosphere locations. This is a SmartWare Shot Dispense kit. Not approved for use in explosive atmospheres. Detailed specifications and kit contents not shown on this installation page.
Reference Manuals
