GRACO 262375 - Pumps Shot Disp Kit

SmartWare Shot Dispense Kit for pumps with large NXT Air Motor provides accurate, economical material dosing that saves time, material and labour costs. Uses sensor technology to track pump position for flowmeter-like accuracy without requiring flowmeters or gear meters in the fluid stream. Features sequence capability allowing up to 14 different shot sizes and shot mode for single shot size display with amount communication.

Specifications

• Flow Rate: 6 cc's to 3.785 l (1.000 gal) shot size capability
• Accuracy: Ranges from 0.25 to 4%, depending on material and shot size
• Power Requirements: 110 or 220 VAC
• Manual: 3A0294
• Air Motor Compatibility: NXT2200 and larger air motors
• Mounting Type: wall mount or floor stand pump

Features

• Accurate dosing without flowmeters or gear meters
• Linear sensor tracks pump position
• Sequence capability for up to 14 different shot sizes
• Shot mode displays single shot size and communicates amount dispensed
• Local Control Module with display
• Pressure sensor ensures accurate dispense

Applications

• Cartridge fill
• Potting
• Encapsulating
• Mold making
• Batching or kitting

Compatible Equipment

• Pumps with large NXT Air Motor
• DuraFlo or Check-Mate pump with NXT technology (wall-mounted or stand-mounted)
• GRACO Supply Systems (Models: S20, S20c, D60, D200 and D200s)
• Check-Mate pumps
• Dura-Flo pumps
• wall mount pump with NXT2200 and larger air motors

Related Parts

• 262370 - for D200 and D60 with large NXT Air Motor
• 262371 - for D200 with small NXT Air Motor
• 262372 - for D200S with large NXT Air Motor
• 262373 - for S20 with large NXT Air Motor
• 262374 - for S20 with small NXT Air Motor
• 262370 - D200 D60 Shot Disp Kit
• 262372 - D200S Shot Disp Kit
• 262373 - S20 Shot Disp Kit

Kit Contents

• Local Control Module
• sensors
• cables
• mounting hardware
• 39 - Control mount bracket
• 35 - Adapter bracket
• 1 - Electronics subassembly
• 2 - Display bracket
• 30 - Screws (multiple)
• 29 - Washers (multiple)
• 36 - Screws
• 37 - Washers
• 38 - Nuts
• 40 - Washer

Handles a wide variety of materials and viscosities from paint to roof tar. Part of SmartWare technology system. SmartWare Shot Dispense Kit for accurate metered dispensing of one component materials. For professional use only. Not approved for use in European explosive atmosphere locations. This is an installation kit that includes control mount bracket, adapter bracket, electronics subassembly, display bracket and associated hardware (screws, washers, nuts). Installation requires shutting off air supply to the system first. Kit supports both floor stand and wall mount configurations.

Reference Manuals

• 340648 (Page 2)
• 3A0294 (Page 1)