GRACO 2005948 - EGP Transfer Pump 115V 7.9gpm (No Hose), 65 PSI

EGP Transfer Pump assembly (based on parts list for model 2005948)

Specifications

• Max Working Pressure: 65 PSI (0.45 MPa, 4.5 bar) Maximum Working Pressure
• Flow Rate: 7.7 gpm (29.1 lpm)
• Voltage: 115 VAC
• Pump Type: gear pump

Compatible Equipment

• 115 VAC EGP Oil Transfer Pump systems
• 25T820
• 25T822

Related Parts

• 25T820
• 25T822
• 133372 - Pump Housing assembly
• 133376 - Dispense Kit
• 133375 - Suction Kit

Kit Contents

• Pump body (1)
• Adapter, pump motor (1)
• Gear, pump (2)
• Seal, shaft (1)
• O-Ring (1)
• Screw, 3/8 - 16 socket head, cap (4)
• Ball, relief valve (1)
• PIN, dowel, steel 3/8 x 3/4 (1)
• Motor, 115 VAC (1)
• Spring, relief valve (1)
• Plug, 12 NPT (1)
• Screw, cap, 5/16-18 (4)
• Adapter, bung (1)
• Nozzle (1)
• 133377 - Inlet Suction Screen (1)

This is a pump only component (no complete system). For pumping non-flammable fluids, including motor oils, hydraulic fluid, and antifreeze. Do not use to pump water. For professional use only. Not approved for use in explosive atmospheres or hazardous (classified) locations. Installation instruction: Install the bung adapter (14) in a drum or reservoir strong enough to support the weight of the pump. This appears to be a different hose and nozzle mounting configuration compared to models 25T820 and 25T822. This appears to be a complete pump assembly. Some components (items 12†, 16†, 17†, 18*, 19*, 20*, 21*) are not included in model 2005948 based on the '--' quantities shown in the table.

Reference Manuals

• 3A8568 (Page 1)