GRACO 226943 - 1:1 Ratio Stubby Fast-Flo Air Operated Piston Transfer Pump, Carbon Steel
Fast Flo 1:1 pumps are designed to operate at air input pressures up to 180 PSI (12 bar, 1.2 MPa) and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount siphon feed applications. Ideal for lower viscosity fluids with plate (flat) check options.
Maximum delivery up to 5 gpm (19 lpm) and maximum fluid working pressure up to 180 PSI (12 bar). Ideal for lower viscosity fluids.
- Air-powered for high reliability and low cost
- Delivery up to 5 gpm (19 lpm)
- Available in stainless steel or carbon steel
- UL options available when installed in accordance with NFPA
Additional Specifications
- Length: 615 mm (34 in.)
- Thread: 1-1/2 in. NPT(F) fluid inlet, 3/4 in. NPT(F) fluid outlet
- Material: Carbon Steel with Leather Packings
- Series: Series B
- Packing Type: leather packed
- Pump Type: Stubby Length Pump
- Overall Length A: 615 mm (34 in.)
- Pump Length B: 181 mm (7.1 in.)
- Fluid Inlet C: 1-1/2 in. NPT(F)
- Fluid Outlet D: 3/4 in. NPT(F)
| Air Inlet Size (in) | 1/4 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Compatible Material | Antifreeze, Asphalt, Windshield Washer Fluid, Motor Oil, Used Oil, Hydraulic Fluid, Oil, Ink |
| Fluid Outlet Size (in) | 3/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Material | Carbon Steel |
| Maximum Air Inlet Pressure (psi) | 180 |
| Maximum Continuous Cycle Rate (CPM) | 100 |
| Maximum Intermittent Cycle Rate (CPM) | 4 |
| Maximum Working Pressure (MPa) | 1.2 |
| Maximum Working Pressure (psi) | 180 |
| Minimum Flow Rate (GPM) | 180 |
| Portable | Non-Portable |
| Pump Ratio | 1:1 |
| Seal Material | Leather |
| Type | Pneumatic Piston Pump |
Compatible Equipment
- ETL listed for light viscosity paints, lacquers, varnishes, thinners, solvents when installed in accordance with NFPA Standards No. 30, Flammable and Combustible Liquids Code, and No. 33 Spray Finishing Using Flammable Materials
- Stubby Length Pumps, Carbon Steel Models
Related Parts
ETL Listed pump for non-corrosive fluids. This is a Series B Stubby Pump model. Parts information can be found on pages 14, 18. This is a complete pump model in the Stubby Length Pumps family. The page shows parts breakdown for this model including displacement pump 215956 which is specifically for Model 226943. Replacement safety labels, tags, and cards are available at no cost. Part of a family of pumps with similar specifications but different lengths. Shown in left diagram of the manual page.
Reference Manuals
