GRACO 226944 - 1:1 Ratio Carbon Steel Fast-Flo Universal-Length Transfer Stubby Pump
Fast Flo 1:1 pumps are designed to operate at air input pressures up to 180 PSI (12 bar, 1.2 MPa) and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount siphon feed applications. Ideal for lower viscosity fluids with plate (flat) check options.
Maximum delivery up to 5 gpm (19 lpm) and maximum fluid working pressure up to 180 PSI (12 bar). Ideal for lower viscosity fluids.
- Air-powered for high reliability and low cost
- Delivery up to 5 gpm (19 lpm)
- Available in stainless steel or carbon steel
- UL options available when installed in accordance with NFPA
Additional Specifications
- Length: 615 mm (34 in.)
- Thread: 1-1/2 in. NPT(F) fluid inlet, 3/4 in. NPT(F) fluid outlet
- Material: Carbon Steel with Polyethylene Packings
- Series: Series B
- Etl Listed: Yes for light viscosity paints, lacquers, varnishes, thinners, solvents
- Pump Type: Stubby Pump
- Packing Type: polyethylene packed
- Pump Length: 181 mm (7.1 in.)
- Overall Length: 615 mm (34 in.)
| Air Inlet Size (in) | 1/4 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Compatible Material | Antifreeze, Asphalt, Windshield Washer Fluid, Motor Oil, Used Oil, Hydraulic Fluid, Oil, Ink |
| Fluid Outlet Size (in) | 3/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Material | Carbon Steel |
| Maximum Air Inlet Pressure (psi) | 180 |
| Maximum Continuous Cycle Rate (CPM) | 100 |
| Maximum Intermittent Cycle Rate (CPM) | 4 |
| Maximum Working Pressure (MPa) | 1.2 |
| Maximum Working Pressure (psi) | 180 |
| Minimum Flow Rate (GPM) | 180 |
| Portable | Non-Portable |
| Pump Ratio | 1:1 |
| Seal Material | Polyethylene |
| Type | Pneumatic Piston Pump |
Compatible Equipment
- Light viscosity paints
- Lacquers
- Varnishes
- Thinners
- Solvents
Related Parts
ETL listed pump evaluated using ASTM Reference Fuels A, C, H, I, and IRM No. 3 Oil. Fluid compatibility should be reviewed against these fluids to determine suitability. Referenced on pages 14, 19. Part of the Stubby Length Pumps, Carbon Steel Models family. Displacement pump only available as piece parts, not available assembled. The manual shows a diagram for Model 226943 but indicates all models in this series share similar construction. Part appears in pump family group with shared dimensional specifications. Shown model 226952 appears to be representative of this family series.
Reference Manuals
