GRACO 26C064 - Waste Oil Evacuation System w/ 24 gal Steel Tank, Suction Probes, Sight Glass, Oil Drain Funnel & Adapters, 7 PSI
Waste Oil Evacuation System model requiring assembly steps 9-12 (drain tube installation and drain bowl setup)
For shops requiring flexibility when it comes to removing used fluids, use Graco’s multi-purpose used oil evacuation system.
Large Offset Collection Pan - Wide offset collection bowl prevents splashing.
Vacuum Gauge - Ensure peak performance with easy-to-read vacuum gauge.
Easy to Drain- Pressurize using shop air for easy oil evacuation.
Vacuum Probes- Variety of flexible suction attachments and adapters included.
Large 24 Gallon (90 Liter) Capacity Receiver- Perfect for small to large shops without an evacuation system.
Sight Glass - Inspect oil quality via large, clear evacuation chamber and verify amount extracted.
Additional Specifications
- Max Working Pressure: Maximum Draining Pressure: 7 PSI (50 kPa, 0.5 bar), Maximum Air Inlet Pressure to Vacuum: 110 PSI (760 kPa, 7.6 bar)
- Material: Steel Tank
- Capacity: 24-Gallon (90 Liter)
- Product Line: Oil Ace™
| Compatible Fluid | Used Oil;ATF |
| Maximum Operating Temperature (°F) | 194 |
| Minimum Operating Temperature (°F) | 30 |
| Overall Height (in) | 59.0 to 70.8 |
| Overall Length (in) | 24 |
| Overall Width (in) | 16 |
| Tank Capacity (gal) | 24 |
| Type | Fluid Reclamation Package |
| Weight (lb) | 73.2 |
| Wetted Parts | Steel, Copper, PVC Plastic, Rubber, Aluminum |
Compatible Equipment
- Oil Ace™ system
- Models 26C061
- 26C062
- 26C063
- 26C064, Similar to model 26C062
Related Parts
- 119577 - Oil Receiver
- 26C061 - Waste Oil Evacuator
- 26C062 - Waste Oil Evacuator with Chamber
- 26C063 - Waste Oil Evacuator with Bowl
- 26C061
- 26C062
- 26C063
Pressurized oil drain for collection of used lubricants. For professional use only. Part of the Oil Ace™ series. Shows funnel, chamber, and collection bowl configuration in diagram. Step 6 installation instructions are specifically for Models 26C062 and 26C064 ONLY. For valve locations see Fig. 2, page 4. Uses chamber cover (13b) as shown in Fig. 11, page 7. This model requires additional assembly steps 9-12 for drain tube and drain bowl installation, unlike model 26C062. Uses components including drain tube (7a), hand wheel (7d), drain bowl (5a), filter tray (5b), and plastic funnel extension (8).
Reference Manuals
