GRACO G30W51 30:1 Merkur Pump, 1.2 gpm (4.5 lpm) fluid flow, Wall Mount
Features:
Merkur fine finish pump packages are designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.
- Proven to outperform and outlast other pumps in their class
- Highest technology air motor on the market
- Low air consumption for increased efficiency
- Muffler provides low operating noise levels
- External valve access allows for easy servicing and online replacement to minimize downtime
- Operator Control Panel located at operator height for easy setting and monitoring
- Throat seal and rod enclosure protects pumped material and wet cup from contamination but can be easily removed to monitor and service
Specifications:
| Convertible | Non-Convertible |
| Fluid Inlet Size (in) | 3/4 |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 3/8 |
| Fluid Outlet Thread Type | NPT |
| Gun Included | 0 |
| Gun Model | No Applicator |
| Gun Technology | Bare Package |
| Gun Type | No Applicator |
| Hose Inlet Diameter (in) | 3/16 |
| Maximum Flow Rate (GPM) | 1.2 |
| Maximum Hose Length (ft) | 25 |
| Maximum Working Pressure (MPa) | 20.7 |
| Maximum Working Pressure (psi) | 3000 |
| Model | Merkur |
| Motor Type | Pneumatic |
| Mount Type | Wall Mount |
| Number of Guns | 0 |
| Power Source | Air |
| Pressure Type | High Pressure |
| Product Type | Bare Package |
| Pump Ratio | 30:1 |
| Pump Type | Pneumatic Piston Pump |
| Standards Met | ATEX, CE |
| Type | Bare Package |
| Weight (lb) | 94 |
| Wetted Material | Stainless Steel, Tungsten Carbide with 6% Nickel, UHMWPE, PTFE, Nylon |
