GRACO 207546 - Series H Monark Air Motor Assembly, for Hinged Clamp Mounting, 180 PSI (1.2 MPa

HINGED CLAMP MOUNTING: SANITARY Model 207546, Series H, Air Motor Assembly

Specifications

• Max Working Pressure: 180 psi (1.2 MPa, 12 bar) Maximum Air Working Pressure
• Series: H
• Mounting Type: hinged clamp
• Application: sanitary

Compatible Equipment

• GRACO fluid handling pumps
• hinged clamp mounting applications
• sanitary applications
• hinged clamp mounting systems

Related Parts

• 206955 - Series K for STANCHION TUBE mounting
• 205997 - Series K for 3 tie rod mounting
• 215363 - Series D for 3 tie rod mounting
• 222791 - Series D for 3 tie rod mounting
• 207547 - BEARING HOUSING Assy
• 206728 - Repair Kit

Kit Contents

• includes items 1-36 as shown in the exploded diagram
• 17M262 - SCREW, thread-forming, hex head; #8-32 x 0.375 in. (9.5 mm)
• 101578 - SCREW, hex head; 5/16 x 0.875 in. (10 mm) long
• 156698 - O-RING; buna-N
• 158360 - YOKE, oil, trip
• 158362 - PIN, toggle
• 158364 - ROCKER, toggle
• 167585 - SPRING, helical compression
• 158367 - GROMMET, rubber, air intake
• 160261 - NUT, adjusting
• 160618 - LOCKWIRE, transfer valve
• 172867 - ACTUATOR, valve
• 160621 - O-RING, nitrile rubber
• 160623 - ANL, toggle
• 160624 - O-RING, buna-N

This is one of several Monark Air Motor variants with different mounting configurations and series designations This is an air motor assembly that includes items 1-36 as indicated in the header. The exploded diagram shows all component parts but specific part numbers for individual components are not clearly visible in this image quality. Includes items 1-36. Repair Kit 206728 is available separately and includes certain replacement parts marked with asterisks.

Reference Manuals

• 307043 (Page 1) Monark Air Motor
• 307056 (Page 15) 5:1 Ratio Monark Sanitary Pump