GRACO 233810 - Pneumatic Back Pressure Regulator, Model P10-RP, 145 PSI max permanent supply pressure, 15-145 PSI regulated Pressure Range
Additional Specifications
- Max Working Pressure: 145 PSI (1000 kPa, 10 bar) maximum permanent supply pressure
- Regulated Pressure Range: 15-145 PSI (100-1000 kPa, 1-10 bar)
- Type: Pneumatic, back pressure
- Series: B
- Model: P10-RP
Specifications
| Gauge Port Size (in) | 1/8 |
|---|
| Gauge Port Type | BSPP |
|---|
| Includes | Regulator Only |
|---|
| Inlet Size (in) | 3/8 |
|---|
| Inlet Thread Type | BSPP |
|---|
| Maximum Flow Rate (GPM) | 4.6 |
|---|
| Maximum Operating Temperature (°F) | 194 |
|---|
| Maximum Regulated Pressure (psi) | 145 |
|---|
| Maximum Working Pressure (psi) | 145 |
|---|
| Minimum Operating Temperature (°F) | 32 |
|---|
| Minimum Regulated Pressure (MPa) | 0.1 |
|---|
| Minimum Regulated Pressure (psi) | 15 |
|---|
| Outlet Size (in) | 3/8 |
|---|
| Outlet Thread Type | BSPP |
|---|
| Type | Back Pressure Regulator |
|---|
| Wetted Material | Stainless Steel, Tungsten Carbide, PTFE, Chemically Resistant Fluoroelastomer |
|---|
Compatible Equipment
Related Parts
- 234257 - P10-RP NPT
- 233811 - P20-RM DN13
- 234255 - P20-RM DN13 NPT
- 233812 - P50-RM
- 234258 - P50-RM NPT
- 233950 - P20-RM DN1
- 234261 - P20-RM DN1 NPT
- 233811 - Pressure Regulator, P20-Rm Dn13, 290 PSI (2000 Kpa
- 233812 - Pressure Regulator, P50-Rm
- 233950 - Mechanical Back Pressure Regulator, 290 PSI max permanent supply pressure, 15-290 PSI Pressure Range
Part of Series B back pressure regulators. Based on model designation key: P = pneumatic operating mode, R = back-pressure regulation action, 10 = 10 bar pressure regulation max Model shown in Fig. 1. Back pressure regulator that limits supply pressure to a set value by opening an outlet and guiding back excess material when predetermined pressure has been achieved. Used in circulating systems. This is a complete pneumatic back pressure regulator unit (not a kit). The manual shows it shares most components with model 234257, with specific differences: uses part 15A219 RING (for non-NPT model 233810), and does not use parts 26 (15C332 FITTING) and 27 (15C333 WASHER) which are only for NPT model 234257. The lower housing is specifically designed for model 233810.
Reference Manuals
- 309474 (Page 2) Low Pressure Fluid Regulators
