Amana LB10801-30 Carbide Tipped Non-Melt Plastic 10" D x 80T M-TCG, -2 Deg, 30MM Bore, Circular Saw Blade

When cutting acrylics and plastics, "chip-welding" a melting of the material is a concern. But not with these Non-Melt blades. With a modified triple-chip grind and a 2° negative hook angle, they produce less heat than a standard blade, leaving a crisp and smooth edge.

• Excellent for cutting:
• Plastics,
• Acrylonitrile Butadiene Styrene (ABS),
• Acetal,
• Acrylic,
• Acrylic Sheets,
• Alupanel,
• Copolymer,
• Coroplast*,
• Correx Boards,
• Corrugated Polypropolyene,
• Delrin,
• Ethylene-Vinyl Acetate,
• Foam Board, Gatorfoam**,
• High Density Polyethylene (HDPE),
• High Impact Polystyrene (HIPS),
• Low Density Polyethylene (LDPE),
• Lucite,
• Mechanical/Engineered Plastics,
• Nitrile RubberNylon,
• Perspex Cast Acrylic Sheet,
• Plastic Laminate Flooring,
• Plexiglas, Poly (methyl methacrylate) (PMMA),
• Polycarbonate (Lexan),
• Polyethylene (PE),
• Polyethylene Terephthalate (PET),
• Polyethylene Terephthalate Glycol-Modified (PETG / PET-G),
• Polypropylene (PP),
• Solid Surface,
• Styrene-Acrylonitrile,
• Styrene-Butadiene Rubber (SBR),
• Styrene-Isoprene-Styrene (SIS), Teflon,
• Thermoplastic Polyolefin (TPO), Trespa Meteon***,
• Ultra High Molecular Weight Polyethylene (UHMWPE),
• Wood

*A soft plastic cardboard made with super soft super flexible PVC.

**A polystyrene foam board bonded between two layers of Luxcell wood-fiber veneer.

***Decorative high-pressure compact laminate (HPL) with an integral surface.