When cutting acrylics and plastics, "chip-welding" a melting of the material is a concern. But not with these Non-Melt blades. With a modified triple-chip grind and a 2° negative hook angle, they produce less heat than a standard blade, leaving a crisp and smooth edge.
Excellent for cutting: Plastics, Acrylonitrile Butadiene Styrene (ABS), Acetal, Acrylic, Acrylic Sheets, Alupanel, Copolymer, Coroplast*, Correx Boards, Corrugated Polypropolyene, Delrin, Ethylene-Vinyl Acetate, Foam Board, Gatorfoam**, High Density Polyethylene (HDPE), High Impact Polystyrene (HIPS), Low Density Polyethylene (LDPE), Lucite, Mechanical/Engineered Plastics, Nitrile RubberNylon, Perspex Cast Acrylic Sheet, Plastic Laminate Flooring, Plexiglas, Poly (methyl methacrylate) (PMMA), Polycarbonate (Lexan), Polyethylene (PE), Polyethylene Terephthalate (PET), Polyethylene Terephthalate Glycol-Modified (PETG / PET-G), Polypropylene (PP), Solid Surface, Styrene-Acrylonitrile, Styrene-Butadiene Rubber (SBR), Styrene-Isoprene-Styrene (SIS), Teflon, . Thermoplastic Polyolefin (TPO), Trespa Meteon***, Ultra High Molecular Weight Polyethylene (UHMWPE), Wood* A soft plastic cardboard made with super soft super flexible PVC. ** A polystyrene foam board bonded between two layers of Luxcell wood-fiber veneer. *** Decorative high-pressure compact laminate (HPL) with an integral surface.
