Baleigh 1002862 Baileigh Drill Press Variable Speed DP-1000VS
This variable-speed drill press runs smoothly even at full capacity—and will do so for years at your shop. Unlike pulley-driven drills, this 16" drill press lets you run tooling at the proper speed to fit your application and extend tooling life.
- 2 hp motor requires 220-volt single-phase power and will work at virtually any shop or site.
- Inverter-driven head drills a maximum capacity of 1” steel.
- You can fine-tune the speed in the range from 150 to 3000 rpm to suit your application.
- Auto-reversing tap has a tapping capacity of 5/8” steel.
- Wide steel column eliminates flexing even when drilling at full capacity.
- Rigid cast iron base and table add strength to the drill’s structure.
- Comes standard with a coolant system, a feature that some competing companies consider an upgrade.
- Includes a safety shield around the drill head to protect you, as well as a halogen light that bends to help you see the project better.
- Baileigh backs this variable-speed drill press machine with a 1-year parts warranty and lifetime technical support by phone from our experienced team.
Specifications:
| Item Number | DP-1000VS |
|---|
| Table Size | 18.1" x 14.2" |
|---|
| Quill Diameter | 2.44" |
|---|
| Spindle Nose to Table | 23.8" |
|---|
| Spindle Nose to Base | 45.3" |
|---|
| Spindle Speed | 150 – 3000 rpm |
|---|
| Spindle Taper | MT 3 |
|---|
| Table Slot | .625" |
|---|
| Tapping Capacity Cast Iron | 3/4" |
|---|
| Tapping Capacity Steel | 5/8" |
|---|
| Main Motor | 2 hp |
|---|
| Drill Capacity Cast Iron | 1.25" |
|---|
| Drill Capacity Steel | 1" |
|---|
| Power | 220V Single Phase |
|---|
| Shipping Weight | 600lbs |
|---|
| Spindle Travel | 5.3" |
|---|
| Column Diameter | 3.62" |
|---|
| Base Dimensions L x W | 27" x 19" |
|---|
| Shipping Dimensions (Inches) | 60x44x83 |
|---|
