Baleigh 1006140 Baileigh Precision Lathe PL-1640
The perfect combination of size and power, this precision lathe includes a Mitutoyo DRO, a collar stop system, and a heavy cast iron base to ensure accuracy.
- 12 speeds from 30 to 2,000 rpm.
- 7.5 hp motor runs on 220-volt 3-phase power.
- No assembly required.
- Factory-installed Mitutoyo DRO (digital readout) helps you make precise cuts.
- Precision ground and hardened ways will withstand years of use in any metalworking shop.
- ⅝” square indexing tool post.
- Collar system lets you set stops for repeat parts.
- This is a gap lathe, so you can remove a section of the slide to fit a slightly larger diameter.
- Full cast iron base, integrated into the mainframe, makes this one of the most rigid lathes on the market.
- Comes standard with:
- 3-jaw chuck.
- Headstock chuck guard with automatic safety switch.
- Steady rest and follow rest.
- Emergency foot brake.
- Flood coolant system (with backsplash guard) to prolong machine life.
- Halogen work light.
- Covered by a 1-year parts warranty.
- Replacement parts are in stock at our Wisconsin headquarters for fast shipping.
- Lifetime technical support by phone means that you can call our team of experienced metalworkers whenever you have questions or need project advice.
Specifications:
| Item Number | PL-1640 |
|---|
| Speed | 30 – 2000 rpm |
|---|
| Spindle Bore | 2.0625" |
|---|
| Threads Diametrical Qty Speed | 32 / 4–32 D.P. |
|---|
| Threads Imperial Qty Speed | 40 / 2–56 T.P.I. |
|---|
| Threads Metric Qty Speed | 53 / .4–14 mm pitch |
|---|
| Threads Module Qty Speed | 44 / .4–7 M.P. |
|---|
| Spindle Taper Sleeve | Morse #4 |
|---|
| Spindle Taper Nose | Morse #6 |
|---|
| Tailstock Quill Dia | 2.125" |
|---|
| Tailstock Quill Taper | Morse #4 |
|---|
| Tailstock Quill Travel | 4.75" |
|---|
| Compound Rest Width | 4.33" |
|---|
| Center Height | 7.086" |
|---|
| Compound Travel | 4.75" |
|---|
| Bed Height | 12.20" |
|---|
| Bed Length | 17157 |
|---|
| Bed Width | 11.81" |
|---|
| Longitudinal Feeds Metric Qty Speed | 40 / .032 – .640 mm / rev. |
|---|
| Main Motor | 7.5 hp |
|---|
| Longitudinal Feeds Imperial Qty Speed | 40 / .0012" – .0252" / rev. |
|---|
| Lead Screw Diameter | 1.25" |
|---|
| Lead Screw Thread Pitch | 4 T.P.I. |
|---|
| Max. Swing In Gap Length | 6.125" |
|---|
| Max. Swing Over Bed | 16" |
|---|
| Max. Swing Over Cross Slide | 9.45" |
|---|
| Max. Swing In Gap Dia | 23.42" |
|---|
| Cross Feeds Imperial Qty Speed | 40 / .0006" – .0126" / rev. |
|---|
| Cross Feeds Metric Qty Speed | 40 / .015 – .320 mm / rev. |
|---|
| Cross Slide Travel | 9" |
|---|
| Cross Slide Width | 7.08" |
|---|
| Cutting Tool Max Section | .625" x .625" |
|---|
| Distance Between Centers | 40" |
|---|
| Feed Rod | .708 dia. |
|---|
| Power | 220V / 3-phase |
|---|
| Shipping Weight | 3940lbs |
|---|
| Shipping Dimensions (Inches) | 90x37x81 |
|---|
