Baleigh 1012426 Hydraulic H-Frame Press HSP-110M-HD
With a 1” plate steel framework and plenty of time-saving features, this hydraulic press sets the standard by which all other models should be measured.
- 110-ton capacity.
- 42.12” working width.
- 8.66” diameter cylinder with 11.8” stroke.
- Runs on 220-volt 3-phase power.
- 7.5 hp motor can push all 110 tons of force without strain.
- cylinder moves left or right within the framework so you can apply force for off-center projects.
- 2-speed down movement (rapid or slow descent) with pressure regulator.
- 6.3” chrome piston automatically returns to top position after the job is done.
- Welded steel construction maintains accuracy, holding up under the machine’s full force without flexing.
- Baileigh backs this hydraulic shop press with a 1-year parts warranty.
- Our experienced team of reps will also provide lifetime technical support by phone.
Recommended for: General assembly, straightening work, and pressing bearings in and out of their housings.
Specifications:
| Item Number | HSP-110M-HD |
|---|
| Return Speed | .393" / sec. |
|---|
| Maximum Pressure | 3858 psi |
|---|
| Motor | 7.5 hp |
|---|
| Piston Head Diameter | 4.72" |
|---|
| Pump Speed | 1.5 / 5.17 gal/min. |
|---|
| Oil Capacity | 7.92 gal |
|---|
| Working Speed | .106" / sec. |
|---|
| Working Width | 36.22" |
|---|
| System Oil Capacity | 3.17 gal |
|---|
| Lowering Speed | .362" / sec. |
|---|
| Maximum Capacity | 110 tons |
|---|
| Cylinder Stroke | 15.75" |
|---|
| Cylinder Movable | Yes |
|---|
| Cylinder Diameter | 10" |
|---|
| Rpm | 3000 |
|---|
| Power | 220V / 3-phase |
|---|
| Shipping Weight | 3400lbs |
|---|
| Shipping Dimensions (Inches) | 98x48x95 |
|---|
