Baleigh 1020692 VMD-828G - Vertical Mill Drill
Don’t have the space for both a gear-driven drill press and a milling machine? The VMD-828G combines 2 functions in 1 space-efficient machine. This mill drill lets you set the right speed for a given application, providing greater control and extending tooling life.
- 2 hp motor runs on 110-volt power and will work almost any site.
- 1.5” maximum drilling capacity.
- Includes 29” x 8” milling-style table which expands the machine’s possible uses.
- Gear-driven head allows you to run tooling at the proper speed for each mill, drill or tap size available: 90, 210, 345, 670, 1180, 1970 rpm.
- Rigid base and very wide cast column adds to machine’s strength and eliminates flexing when milling or drilling at full capacity.
- Comes standard with coolant system, R8 spindle taper, and a flexible halogen light.
- Backed by a 1-year warranty and lifetime technical support by phone from our team of experienced reps.
Specifications:
| Item Number | VMD-828G |
|---|
| Spindle Speeds | 90, 210, 345, 670, 1180, 1970 RPM |
|---|
| Table Size | 28.75" x 8.25" |
|---|
| Motor | 2 hp |
|---|
| X Axis Travel | 19-1/2" |
|---|
| Y Axis Travel | 9" |
|---|
| Spindle Nose to Base | 16.14" |
|---|
| Spindle Stroke | 4-3/4" |
|---|
| Spindle Taper | R8 |
|---|
| T Slots | .550" |
|---|
| Coolant Pump | 1/8 hp |
|---|
| Power | 110V |
|---|
| Shipping Weight | 815lbs |
|---|
| Drill Capacity | 1.5" |
|---|
| Spindle Travel | 4.75" |
|---|
| Shipping Dimensions (Inches) | 60x44x51 |
|---|
