Baleigh 1227902 DP-1375VS-110 Variable Speed Drill Press
Sometimes you just need a high quality metalwroking drill press in am area that doeesnt have easy access to 220V power. That's where the Baileigh DP-1375VS-110 comes in. Like all of our drill presses, the DP-1375VS-110 is built to last for years because it draws strength from its sturdy base and column that won’t flinch during the heaviest drilling sessions. With a 22” swing, this variable-speed drill press will prove an ideal investment for any machinist or fabricator.
- 2 hp motor runs on just 110 volt power.
- Tackles a maximum drilling capacity of 1.1/16” mild steel.
- Heavy duty spindle transfers power to the #3 Morse taper tooling .
- Speed potentiometer dial controls powerful inverter-driven head.
- Variable drilling speed, ranging from 120 to 2000 rpm, lets you choose the right setting to suit your application.
- Digital readout displays actual spindle rpm, ensuring precise results time after time.
- Features an auto-reversing tap function with up to 5/8” capacity.
- 4-1/2" Wide column provides extra support and rigidity to reduce flexing even during the toughest drilling sessions.
- Base and 22” x 18.5” table are made of a heavy iron casting to increase rigidity.
- Very large .625" T-slots let a vise or fixture securely hold your material.
- Coolant system, stored in the base, sprays out at the end of the spindle behind the splash and safety guard to extend drill bit and tap lifespan.
- Covered by a 1-year parts warranty and lifetime technical support by phone from Baileigh’s team of experienced reps.
- Need it soon? We typically keep the DP-1375VS-110 in stock for quick shipments.
Specifications:
| Item Number | DP-1375VS-110 |
|---|
| Spindle Speeds | Inverter Driven Varialble |
|---|
| Max. Drill Capacity | 1 |
|---|
| Swing | 20.8" |
|---|
| Spindle Travel | 5.9" |
|---|
| Base Size | 27" x 19" |
|---|
| Table Size | 22" x 18.75" |
|---|
| Coolant System | Yes |
|---|
| Spindle Nose to Table | 33.5" |
|---|
| Spindle Nose to Base | 46.875" |
|---|
| Spindle Speed | 120 - 2000 rpm |
|---|
| Spindle Taper | MT 3 |
|---|
| Table Slot | .625" |
|---|
| Tapping Capacity | 5/8" |
|---|
| Table Load Capacity | 154 lbs |
|---|
| Main Motor | 2 hp |
|---|
| Motor Coolant | 1/8 hp |
|---|
| Drill Capacity Cast Iron | 1-1/16" |
|---|
| Drill Capacity Steel | 1-1/4" |
|---|
| Power | 110 Volt |
|---|
| Shipping Weight | 579lbs |
|---|
| Drill Capacity | 1.25" |
|---|
| Column Diameter | 4.52" |
|---|
| Shipping Dimensions (Inches) | 60x44x79 |
|---|
