ET&F Fastening ASK-100-0100H Galvanized Steel Framing Pins for E45, .100 x 1", 8000ct
Features and Benefits:
AKN-100-XXXXHA series pins are designed specially for the E45 tool to attach plywood, oriented strand board (OSB) and fiber cement siding to cold formed steel from 97 mil (12 GA.) to 27 mil (22 GA.). These pins are finished with Aericote 1000 coating which provides ten times the corrosion protection of electroplated zinc. When driven, the fastener separates completely from the sheet plastic collation leaving a clean fastening, especially important when face nailing siding. The 1" long pins can be used for select steel-to-steel applications of up to two layers of 54 mil (16 GA.). A special knurl pattern improves performance in steel-to-steel connections. These pins are limited in use to fastening to maximum 43 mil (18 GA.) steel.
Specifications:
Length: 1" (25mm)
Quantity: 8,000 pins
Nail Head: Full Round Head
Material: Heat Treated High Carbon Steel
Finish: Mechanical Diameter
Head Diameter: .300"
Nail Diameter: .100"
Shank Type: Severe Knurled
Coil Capacity: 250 pins
Coil Type: Plastic Sheet Coil
For Use With: E45 Nailer
