ET&F Fastening E45 Siding, Steel-to-Steel and Gypsum Board Nailer (Sequential Fire)
Features and Benefits:
Using sheet plastic collation, this system eliminates plastic residue from under the head of driven pins for a clean installation. The tool operates at a maximum air pressure of 120 psi and has the power to attach fiber cement siding to steel as thick as 97 mil (12 GA). Reduce the air pressure and adjust the overdrive knob and the tool accurately attaches wallboard to steel as thin as 20 GA. The Model E45 handles pins 1" long to 2 1/2" long. For face nailing fiber cement siding, use AKN-100-XXXXHA pins. For select steel-to-steel applications of up to two layers of 54 mil (16 GA.) with rigid bracing use ASK-100-XXXXH pins. This versatile tool can also be used for special applications requiring wire collated pins or stainless steel pins.
Specifications:
Fastener Type: AKN-100 and ASK-100 Coil Nails
Magazine Capacity: 250 pins
HxWxL: 11-7/8" x 5-1/8" x 11-1/16"
Weight: 6 Lbs. (2.7kg)
Pressure: 70-120 PSI
Lubricant: Non-detergent pneumatic tool lubricant
Actuation System: Sequential Fire
Loading: Coil
