GRACO 16V736 - Kit, Frp, Retrofit, External, Stainless Steel
Specifications
- Material: stainless steel
- Purpose: To replace non-metallic fittings with stainless steel fittings used in external and internal mix FRP Proportioners
- Application: External Mix Only
Compatible Equipment
- FRP Proportioners
- FRP Proportioner manual 3A2012
Related Parts
Kit Contents
- stainless steel fittings for conversion
- new tubing (7, 8)
- 16V703 - FITTING, 1/4 NPT x 3/8 tube, sst (1)
- 16V704 - FITTING, 1/8 NPT x 1/4 tube, 90, sst (3)
- 16V705 - FITTING, 1/8 NPT x 1/4 tube, sst (2)
- 16V706 - FITTING, tee, compression, 1/4 (1)
- 16V707 - BUSHING, filter, tank (1)
- 16V672 - FILTER, assy, 100 mesh (1)
- 054106 - TUBE, polythylene; 0.375 in. OD; 1.25 ft (0.38 m) (1)
- 054118 - TUBE, polythylene; 0.25 in. OD; 5 ft (1.5 m) (1)
- 119400 - SEALANT, pipe; 2 ml packet (2)
- 20170-00 - FITTING, elbow, 1/4 NPTm x 3/8 tube, 90° (1)
For professional use only. Part of FRP Stainless Steel Catalyst Fitting Kit system. Read all warnings and instructions in this manual and in the FRP Proportioner manual 3A2012. This is a retrofit kit to convert FRP system from non-metallic fittings to stainless steel fittings. Kit includes replacement tubing that is not compatible with stainless steel fittings. Apply sealant to threads during installation. Part 2 shown in diagram is stainless steel fitting used on pump but not included in kit. This is an external FRP conversion kit, related to the internal FRP conversion kit 16V735. Kit contains various fittings, tubes, filter assembly, bushing, and pipe sealant.
Reference Manuals
