GRACO 17C417 - Finish Pro II 395 PC Electric Air-Assisted Airless Sprayer, 1500 PSI
The GRACO FinishPro II 395 PC Electric Air-Assisted Airless Sprayer delivers HVLP quality finish at the speed of an airless sprayer. This high-performance system provides production fine finish quality with material delivered at lower pressure than traditional airless (500-1500 PSI vs 1500-3000 PSI) and partially atomized through a small tip. Full atomization is achieved by adding a small amount of air (5-35 PSI) to the edges of the spray fan, resulting in a softer pattern, more control, higher transfer, and less over spray.
With features that make a great sprayer even better, the FinishPro II 395 PC is Graco’s premier solution to fine finishing. It delivers a high quality finish at a high production rate, and can handle the most challenging materials.
Includes the features and output to quickly deliver high-quality finishes.
- SmartControl 1.0 with Digital Display
- Increased spray performance
- Consistent spray fan without pressure fluctuations at all spraying pressures
- Digital display accurately shows spraying pressure
- SmartComp
- Compressor is activated by the gun trigger—if you’re not spraying, it’s not running!
- Reduces jobsite noise, resulting in less fatigue
- Automatic shut-off reduces moisture entering the system and extends compressor life
- Pulling trigger delivers instant air to the gun with zero lag
- Release the trigger and SmartComp shuts off the compressor after 5 seconds
- Extends compressor life
- Chromex Endurance Pump
- The most reliable pump on the market—lasts 2 times longer than the next leading brand
- Long-life V-Max Blue packings, Chromex rod and hardened stainless steel cylinder
- QuikAccess intake valve for fast cleaning or debris clearing
- ProConnect
- Fast and easy on-the-job Pump Replacement System
- 1-minute jobsite replacement in 3 simple steps
- Pinless design eliminates the chance of losing parts during the change-out process
- High-Output On-Board Air Compressor
- Ideal for on-site finish jobs
- Delivers 3.2 ft³/min at 35 PSI (0.1 m³/min at 2.4 bar)—enough air to break up the heaviest of materials
- Exclusive Pressure Unloader results in quieter operation
- Cooling coil reduces air temperature, extending the life of the critical components and providing safer operator handling
- Precision-Cut RAC X FF LP SwitchTip
- Less overspray and increased pump life
- Sprays at lower pressures with less overspray
- Pre-orifice design produces a perfect airless finish
- Finer atomization and soft edges for easier overlapping
- Reduces prep and cleanup
- Includes solvent seal for hot solvents
- G40 Spray Gun
- An industrial quality air-assisted spray gun that delivers superior finishing results
- Integrated air valve improves gun handling
- RAC X guard included
- Flat tip conversion kit included
- Super-Flex Hose Set
- The flexibility to get into tight spaces—focus on the task, not the tool!
- Extremely lightweight in hand, which reduces fatigue
- Connects directly to the gun for maximum flexibility
- Flex Wrap hose skin protects from paint build up and increases hose durability
- Two Sprayers in One
- Select air-assisted or airless modes, depending on what’s best for the application
- Simple, color-coded labels easily identify airless and air-assisted airless modes with a single selector switch
- Self-Contained & Portable
- One plug runs the entire unit, simplifying jobsite operation
Additional Specifications
- Flow Rate: 47 L (178 gpm)
- Max Working Pressure: 500-1500 PSI material pressure, 5-35 PSI air assist
- Gauge: .021
- Transfer Efficiency: 70-80%
- Durability: 2X longer lasting than next leading brand
- Spray Tip Life: 2X longer than competitors
- Maximum Tip Size: .021
- Weight: 107 (48.5) kg/lbs
- Motor Hp: 7/8 TEFC
- Hose Wrap: Flex Wrap
- Power Source: Corded
| Amperage (A) | 15 |
| Engine Size (HP) | 0.875 |
| Frame Configuration | Cart |
| Gun Included | 1 |
| Includes | G40 Gun Air-Assisted Airless Gun, RAC X FF LP 210 Spray Tip, RAC X 517 Spray Tip, RAC X Air-Assisted Airless Guard, Fine Finish Flat Tip Kit, Fine Finish 309 Flat Tip, 50 ft Super-Flex Hose Set, 1/4 in x 50 ft BlueMax II Airless Hose, TSL 4 oz. |
| Inlet Paint Strainer | 100 Mesh Stainless Steel Screen |
| Maximum Flow Rate (GPM) | 0.47 |
| Maximum Hose Length (ft) | 50 |
| Maximum Sound Pressure Level (dB(A)) | 79 |
| Maximum Tip Size (in) | 0.021 |
| Maximum Tip Size 1 Gun (in) | 0.021 |
| Maximum Working Pressure (MPa) | 22.8 |
| Maximum Working Pressure (psi) | 3300 |
| Minimum Generator Power (W) | 4000 |
| Model | FinishPro II |
| Motor Type | TEFC DC |
| Number of Guns | 1 |
| Outlet Paint Filter | 100 Mesh Stainless Steel Screen |
| Overall Height (in) | 40.5 |
| Overall Length (in) | 32.5 |
| Overall Width (in) | 21 |
| Phase | 1 |
| Power Rating (HP) | 0.875 |
| Power Source | Electric |
| Pressure Control Type | SmartControl 1.0 |
| Pump Mount Type | ProConnect |
| Pump Rod Type | Chromex |
| Pump Type | Endurance |
| Recommended Annual Usage | Up to 1095 gallons per year |
| Series | 395 PC |
| Spray Type | Air-Assisted Airless |
| Standards Met | Certified to CAN/CSA C22.2 No.68, Conforms to UL1450, ETL Certified |
| Type | Air-Assisted Airless Sprayer |
| Voltage (V) | 120 |
| Weight (lb) | 110 |
| Wetted Material | Acetal, Aluminum, Fluoroelastomer, Leather, Nickel-Plated Carbon Steel, Nylon, PTFE, Polyethylene, Stainless Steel, Tungsten Carbide, UHMWPE, Urethane, Zinc-Plated Carbon Steel |
Features
- Air-assisted airless technology for superior finish quality
- SmartControl with Digital Display - accurately shows spray pressure without pressure fluctuations
- G40 Airless Gun with ultralight trigger pull and ergonomic fit
- Endurance Piston Pump - lasts 2X longer than leading brand
- Onboard Air Compressor with SmartComp delivers superior finish
- ProConnect - No Tools Pump Replacement System
Applications
- Production fine finish spraying
- High-end finish quality applications
- Projects requiring minimal overspray
- Applications where finish quality and speed are both critical
- Fine finishing applications
- High production rate jobs
Compatible Equipment
- G40 Airless Gun
- Air-assisted airless tips
- RAC X FF LP SwitchTip
- Precision-Cut Fine Finish Flat Tip
- G40 Spray Gun
- RAC X FTL P210 tips
Related Parts
- 17E908
- 17C924 - FinishPro GX 19 Corded
- 250341 - FinishPro GX 19 Cordless
- 17C908 - FinishPro II 595 PC PRO
Part of the FinishPro II Air-Assisted Airless Sprayer series. Features ProConnect system available on FinishPro II Models for quick pump replacement and reduced downtime. This is the complete FinishPro II 395 PC air-assisted airless sprayer system. The related part 17E908 appears to be the FinishPro II 595 PC model shown on the right side of the page. This is part of GRACO's FinishPro II series, positioned as a high productivity air-assisted airless sprayer. The 395 PC model offers corded operation for consistent power delivery in professional applications.
Reference Manuals
