GRACO 180199 - Inlet Fluid Strainer Screen, 20 Mesh

GRACO 180199 is the 20 mesh inlet fluid strainer screen (filter element) installed in the Y-strainer at each proportioning pump inlet. It filters solid matter out of the incoming material so debris cannot plug the inlet check valves. The 20 mesh screen is the standard fitment; a finer 80 mesh screen is offered as an option (see Related Parts).

Specifications

• Mesh Size: 20 mesh (standard)
• Function: Inlet fluid strainer screen / filter element
• Sold As: 1-pack (single screen)
• Quantity Used: one screen per side (A and B)

Maintenance

Inspect the screen regularly and clean as required. Replace the screen when more than 25% of the mesh is blocked.

Compatible Equipment

• GRACO Reactor Hydraulic & Electric Proportioners
• GRACO Reactor 2 Hydraulic Proportioning Systems
• GRACO HFR Hydraulic Fixed-Ratio Proportioner
• GRACO HFRL and HFRS Proportioners

Related Parts

• 255082 - Inlet Strainer Screen, 80 Mesh (finer alternative); 2-pack
• 255083 - Inlet Strainer Screen, 80 Mesh (finer alternative); 10-pack
• 15H200 - Strainer Gasket, PTFE
• 15H199 - Strainer Plug
• 15H198 - Inlet Strainer Manifold

Reference Manuals

• 311300 (Page 58) - Reactor, Repair
• 312063 (Page 43) - Reactor Hydraulic Proportioners, Repair
• 313998 (Page 47) - HFR Hydraulic Fixed-Ratio Proportioner, Repair
• 334946 (Page 97) - Reactor 2 Hydraulic Proportioning Systems, Repair
• 3A2176 (Page 57) - HFRL and HFRS Proportioners