GRACO 2000501 - .030 Fluid Cartridge Kit, 20 PSI

Fluid Cartridge Kit for General Industry application with 0.030 in. (0.8) orifice size

Specifications

• Max Working Pressure: 5-20 PSI (0.035-0.14 MPa, 0.35-1.4 bar)
• Orifice Size: 0.030 in. (0.8 mm)
• Recommended Viscosity: light 5-15 centipoise
• Typical Flow Rate: 4-10 oz/min (0.12-0.30 l/min)
• Construction: SST Nozzle, PEEK Tip

Compatible Equipment

• 25F168 - Stellair Automatic Conventional Gun w/ Fluid Control Knob, General Industry, .042" Nozzle
• 25F163 - Stellair Automatic Conventional Air Spray Gun, General Industry, .030" Nozzle
• 25F181 - Stellair Automatic Air Spray Gun (Base Model, Requires Specific Nozzle/Cap Setup)

Related Parts

• 2000502 - .042 Fluid Cartridge Kit
• 2000503 - .055 Fluid Cartridge Kit
• 2000504 - .070 Fluid Cartridge Kit
• 25F224 - Nozzle Kit
• 2000502 - 0.042 in. Fluid Cartridge Kit
• 2000503 - 0.055 in. Fluid Cartridge Kit
• 2000504 - 0.070 in. Fluid Cartridge Kit

This is a fluid cartridge kit used with .030 orifice size spray guns. Compatible models include General Industry Conventional, General Industry HVLP, and General Industry Compliant spray gun models. Application: General Industry, Air Brush Trim. The fluid flow and pattern width depend on the size of the nozzle, the fluid viscosity, and the fluid pressure. Use a fluid nozzle that will achieve the required flow with the needle fully triggered at a fluid pressure of 5-20 PSI.

Reference Manuals

• 407194 (Page 32) Stellair Auto Air Spray Gun