GRACO 205532 - Hydraulic-to-Steel Needle Adapter, 250 PSI
Specifications
- Max Working Pressure: 250 PSI (18 bar) Maximum Working Pressure
Compatible Equipment
- flush fittings
- proportioner with four main bearings on lever arm
Related Parts
- 205582 - Hydraulic-To-Nylon Needle Adapter, 250 PSI (18 Bar) Maximum Working Pressure
- 203504 - 3/16" x 12" Hydraulic Hose w/ Lock Sleeve Connector 5000 PSI
Kit Contents
- 164799 - NEEDLE, adapter
- 203497 - CONNECTOR, locking sleeve, 18-27 NPT(F)
This is the Hydraulic-to-Steel Needle Adapter 205532, used for flush fittings. Contains 2 components as shown in the exploded diagram. Used to grease all four bearings on the proportioner. One or two squirts (2-3 cc) will be sufficient for lubrication. Used for lubricating the four main bearings (21) on the lever arm. One or two squirts (2-3 cc) will be sufficient for greasing.
Reference Manuals
- 306708 (Page 3) Lube Equipment Couplers, Adapters, Nozzles, and Z-Swivels
- 3A3092 (Page 14) Hydra-Cat H.P. Variable Ratio Proportioning Pump
- 684025 (Page 12) 684025e Hydra-Cat H.P. VR Proportioning Pump, Air-Powered King and Premier
