GRACO 233057 - Husky 716 55 gal SS Transfer Pump Package w/ SS Seats, PTFE Balls, PTFE Diaphragms & SS Tube
The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
- Center- and end-porting
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- 3/4 in (19.05 mm) center- and end-porting
- No seals to leak or fail
- Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Additional Specifications
- Material: Stainless steel pump, stainless steel bung base, stainless steel tube
- Atex Rating: II 2 GD Ex h IIC 66°C...135°C Gb Ex h IIIC T135°C Db
- Temperature Limitation: ATEX T-code rating is dependent on the temperature of the fluid being pumped. Fluid temperature is limited by the materials of the pump interior wetted parts.
| Application | Industrial |
| Ball Material | PTFE |
| Compatible Material | Antifreeze, Detergents, Motor Oil, Grease & Oil, Cutting Oil, Water - Wastewater Treatment, Water, Ink |
| Diaphragm Material | PTFE |
| Fluid Inlet Size (in) | 3/4 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 3/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Includes | Bung Base, Stainless Steel Tube |
| Inlet Size (in) | 1/4 |
| Inlet Thread Gender | Female |
| Inlet Thread Type | NPT |
| Manifold Configuration | Split Port |
| Material | Stainless Steel |
| Maximum Air Pressure (psi) | 100 |
| Maximum Cycle Rate (CPM) | 400 |
| Maximum Flow Rate (GPM) | 14 |
| Maximum Fluid Pressure (MPa) | 0.7 |
| Maximum Fluid Pressure (psi) | 100 |
| Maximum Operating Temperature (°F) | 225 |
| Maximum Solid Size (in) | 0.094 |
| Motor Type | Pneumatic |
| Number of Pieces | 2 |
| Series | 716 |
| Type | Pneumatic Diaphragm Pump Package |
Compatible Equipment
- 24B674, 241674 AL-MC-TTE
- 233047 - Drum Pump Accessory Kit ASSS, SS2SS
Related Parts
- 233051 - Husky 515 55 gal PP Transfer Pump Package w/ PP Seats, PTFE Balls, PTFE Diaphragms & PP Tube
- 233052 - Husky 515 55 gal AC Transfer Pump Package w/ AC Seats, PTFE Balls, PTFE Diaphragms & SS Tube
- 233053 - Husky 515 55 gal AC Transfer Pump Package w/ AC Seats
- 233054 - Husky 716 AL Transfer Pump Package w/ AC Seat, SP Ball & SP Diaphragm
- 233055 - Husky 716 55 gal AL Transfer Pump Package w/ AC Seats, Buna Balls, Buna Diaphragms & AL Tube
- 233056 - Husky 716 55 gal AL Transfer Pump Package w/ AC Seats, PTFE Balls, PTFE Diaphragms & AL Tube
Kit Contents
This is marked with an asterisk (*) indicating it has ATEX certification. The asterisk note explains that ATEX T-code rating depends on fluid temperature and is limited by pump interior wetted parts materials. This is a drum pump package that includes pump 24B674 and Kit No. 233048. Kit 233048 includes stainless steel bung base 233076 and stainless steel suction tube 196094. This is a pump package configuration with stainless steel construction throughout. Compatible with specific pump models as indicated by checkmarks in the matrix. See Parts Drawing on page 9 for additional details.
Reference Manuals
- 309116 (Page 1) Husky 515/Husky 716 Drum Pump Kits and Packages
- 313997 (Page 16) HFR, Setup-Operation
- 313998 (Page 13) HFR Hydraulic, Fixed-Ratio Proportioner, Repair
- 3A0235 (Page 17) Feed Supply Kits
