GRACO 24B321 - Kit, Replacement, Base Coat Pump, 1000 PSI
Specifications
- Max Working Pressure: 1,000 PSI (69 bar) maximum
- Compatible Materials: Only water-based materials
- Aggregate Size: up to 2.5 mm (.100 in.) in longest dimension
- Texture Compatibility: Smooth to heavily aggregated textures with silica sand, perlite, vermiculite and polystyrene; Smooth, medium, coarse and extra coarse textures
Compatible Equipment
- HTX 2030 Sprayer
- Base Coat Pump
Related Parts
- 24B560 - Pressure Transducer Replacement Kit, 5000 PSI
- 24B572 - Repair Kit, Drain Valve, Texture, 1000 PSI
- 15X762 - Strainer, 2" NPT
- 15X088 - Inlet Valve Extension
- 15X087
- 235186 - Repair Kit, Pump
Kit Contents
Pump will only run when ON/OFF switch is in ON position and pump control is rotated clockwise away from OFF position, and either Prime Switch on pressure control box and/or Applicator Switch near end of material hose are also switched ON. The pump control adjusts flow rate depending on engine speed and pump control setting. Flow control has 4 positions: Flow 3 (continuous), Flow 2 (slightly reduced), Flow 1 (more reduced), and OFF. This is a displacement pump component used in the Base Coat Pump assembly. Reference number 47 in the diagram with quantity of 1. All parts shown are included in Pump (47) 24B321. Some parts are also included in Repair Kit 235186, which can be purchased separately.
Reference Manuals
- 313483 (Page 7) HTX 2030 257369, Operation, Repair ( Chinese)
- 313888 (Page 5) Operation, HTX 2030
- 313890 (Page 6) HTX 2030
