GRACO 24B764 - Husky 2150 PP Pump AL Center Section PP Seats PTFE Balls & PO Diaphragm, End Flange
Industrial-grade pump component designed for demanding fluid handling applications, featuring aluminum construction with polypropylene seats, PTFE balls, and end flange threading for reliable performance in chemical processing and industrial environments
The Husky 2150 air operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
- Overall improved efficiency (up to 40% more efficient)
- Highest fluid flow rate in its class
- Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
- Expanded material offering to handle endless applications
- Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump
- 2 in. (51 mm) ANSI end-porting
- Fluid flow up to 150 gpm (568 lpm)
- Fluid pressure to 120 PSI (8.4 bar, 0.84 MPa)
- Lube-free operation
- Epoxy-coated air section for tough environmental conditions
Additional Specifications
- Thread: End Flange
- Material: Aluminum body with Polypropylene seats and PTFE balls
- Pump Size: 2.0 in
- Air Motor: V SST (standard)
- Fluid Section: 4 (SST; see manual 308368)
- Seats: 4* (17-4 PH SST)
- Balls: 4* (440C SST)
- Diaphragm Type: overmolded diaphragms
- Pump Type: Husky diaphragm pump
- Series: Series A
- Model Digits: D-F-2-9-1-1 equivalent for SST construction
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Ball Material | PTFE |
| Center Section Material | Aluminum |
| Compatible Material | Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Water - Wastewater Transfer |
| Diaphragm Material | PTFE Overmold |
| Fluid Inlet Size (in) | 2 |
| Fluid Outlet Size (in) | 2 |
| Fluid Section Material | Polypropylene |
| Manifold Configuration | End Port |
| Manifold O-Ring Material | PTFE |
| Material | Polypropylene |
| Maximum Air Consumption (SCFM) | 175 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 145 |
| Maximum Flow Rate (GPM) | 150 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Operating Temperature (°F) | 150 |
| Maximum Solid Size (in) | 0.25 |
| Power Source | Air |
| Seat Material | Polypropylene |
| Standards Met | CE |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 49 |
Features
- PTFE/EPDM overmolded diaphragms for chemical resistance
- Aluminum air motor construction for durability
- Polypropylene fluid section for corrosion resistance
- PTFE seats and balls for chemical compatibility
- End flange connection for secure installation
- 2.0 inch pump size for medium flow applications
Applications
- Industrial fluid transfer
- Chemical processing
- Corrosive fluid handling
- Manufacturing processes
Compatible Equipment
- Husky pump systems
- Industrial pump installations requiring end flange connections
- Husky 2150 pump series
Related Parts
Part of the industrial pumps series with PTFE/EPDM overmolded diaphragms. Temperature range: 40°F to 180°F (4°C to 82°C). FDA-compliant materials available in other configurations. This is a complete pump model, not a component part. Related to other overmolded diaphragm pump models in the 24B series. ATEX T-code rating is dependent on fluid temperature and is limited by pump interior wetted parts materials. This pump features SST (stainless steel) construction throughout the fluid path. Materials are FDA-compliant and meet United States Code of Federal Regulations (CFR) Title 21, Section 177. For ordering replacement parts, refer to part lists on pages 29-31. The digits in the matrix do not correspond to the ref. nos. in the parts drawing and lists.
Reference Manuals
