GRACO 24B833 - Husky 2150 PVDF Pump AL Center Section PVDF Seats PTFE Balls & PO Diaphragm
Husky 2150 PVDF Pump with Conductive Polypropylene fluid section, Santoprene seats, Santoprene balls, and Santoprene diaphragms
The Husky 2150 air operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
- Overall improved efficiency (up to 40% more efficient)
- Highest fluid flow rate in its class
- Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
- Expanded material offering to handle endless applications
- Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump
- 2 in. (51 mm) ANSI end-porting
- Fluid flow up to 150 gpm (568 lpm)
- Fluid pressure to 120 PSI (8.4 bar, 0.84 MPa)
- Lube-free operation
- Epoxy-coated air section for tough environmental conditions
Additional Specifications
- Pump Type: Husky 2150 diaphragm pump
- Air Motor: F aluminum (standard)
- Fluid Section: A (Conductive Polypropylene)
- Seats: 6* (Santoprene)
- Balls: 6* (Santoprene)
- Diaphragms: 6* (Santoprene)
- Series: Series A
- Fda Compliant: Yes - materials are FDA-compliant and meet CFR Title 21, Section 177
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Ball Material | PTFE |
| Center Section Material | Aluminum |
| Compatible Material | Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Water - Wastewater Transfer |
| Diaphragm Material | PTFE Overmold |
| Fluid Inlet Size (in) | 2 |
| Fluid Outlet Size (in) | 2 |
| Fluid Section Material | PVDF |
| Manifold Configuration | End Port |
| Manifold O-Ring Material | PTFE |
| Material | PVDF |
| Maximum Air Consumption (SCFM) | 175 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 145 |
| Maximum Flow Rate (GPM) | 150 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Operating Temperature (°F) | 150 |
| Maximum Solid Size (in) | 0.25 |
| Power Source | Air |
| Seat Material | PVDF |
| Standards Met | CE |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 68 |
Compatible Equipment
Related Parts
- 24B762
- 24B763
- 24B764
- 24B765, DF5A11
Part of the 24B series pumps with overmolded diaphragms. Plus models include stainless steel center sections. ATEX T-code rating is dependent on fluid temperature and materials of pump interior wetted parts. This pump is the same as Model DF5A11 except for the serial plate and parts listed in the chart. Materials comply with CFR Title 21, Section 177, Parts 177.2600, 177.1520, 177.1550. The 6-digit model number format is D + 5 additional digits defining materials of construction.
Reference Manuals
