GRACO 24C214 - HVLP Pressure Verification Kit, for checking air cap atomizing & fan pattern air pressure. Not to be used for actual spraying., 10 PSI

HVLP Pressure Verification Kit designed for checking air cap atomizing and fan pattern air pressure at various supply air pressures. Essential tool for verifying proper spray gun setup and air pressure calibration. Not intended for actual spraying applications.

Specifications

• Max Working Pressure: 10 PSI (70 kPa, 0.7 bar) maximum for HVLP compliance
• Usage Restriction: Not to be used for actual spraying
• Application: For use in checking air cap atomizing and fan pattern air pressure at various supply air pressures

Features

• Enables checking of air cap atomizing pressure
• Verifies fan pattern air pressure
• Works at various supply air pressures
• Dedicated verification tool for HVLP systems

Applications

• Air pressure verification for HVLP spray guns
• Spray gun setup and calibration
• Quality control testing
• Equipment maintenance and troubleshooting

Compatible Equipment

• HVLP spray gun systems

Related Parts

• 24C216 - Fittings Kit, 1/4 inch
• 24D143 - Robot Adapter Kit Fanuc Paint Mate 200
• 24D008 - Inlet Air Needle Valve

Specifically designed for pressure verification only, not for actual spraying operations Not to be used for actual spraying. Install the kit air cap on the gun. Turn on the air to the gun and read the air pressure on the gauge. To be 'HVLP compliant,' the atomizing and fan pattern air pressure must not exceed 10 PSI (70 kPa, 0.7 bar).

Reference Manuals

• 344813 (Page 7)
• 313869 (Page 31)