GRACO 24E501 - Kit, Ratio, 1:1, 1.81", Stainless Steel, 100 PSI
GRACO 24E501 conversion kit for low flow regulators, designed to convert existing regulators to 1:1 ratio operation. This kit includes piston parts and air diaphragm components essential for precise fluid pressure control in automated air-operated applications and low flow rate/viscosity applications.
Specifications
- Ratio: 1:1
- Flow Rate: 0.06 - 6.2 bar (1 - 90 PSI) fluid output
- Max Working Pressure: Max 7 bar (100 PSI) air pressure, Max 20.6 bar (300 PSI) fluid input
- Material: Stainless steel components
- Ratio Spacer Color: Silver
- Height: 100 mm (3.94 in)
- Diameter: 46 mm (1.81 in)
- Fluid Connections: 1/4 - 18 NPT(m) inlet, 1/8 - 27 NPT(F) outlet
- Air Connections: 4 mm (5/32) OD tube
- Color Code: Silver
- Spacer Color: silver
Features
- Springless fluid path for consistent flow
- Stainless steel construction for durability
- Air bypass feature for operational flexibility
- Precise fluid pressure control
- Compatible with fluids up to 75 cp viscosity
Applications
- Intricate finish details where precise control of fluid pressure is needed
- All automated applications for air operated fluid regulation
- Low flow rates/low viscosity applications
- Automated spray gun applications
Compatible Equipment
- GRACO low flow regulators
- AirPro EFX automatic spray guns
- fluid regulators mentioned in this manual
- 24C375 - 1:1 Precision Flow Fluid Pressure Regulator, 90 PSI max pressure, silver ratio spacer, 1.81", Stainless steel screws
- 24E471 - 1:2 Precision Flow Fluid Pressure Regulator, 50 PSI max pressure, green ratio spacer, 1.81", Stainless Steel Screws
- 24E472 - 1:3 Precision Flow Fluid Pressure Regulator, 30 PSI max pressure, black ratio spacer, 1.81", Stainless Steel Screws
Related Parts
Kit Contents
- Piston parts
- Air diaphragm
- spacer (3†)
- ratio piston (14†)
This is a conversion kit that allows modification of existing regulators to achieve 1:1 ratio operation. Silver color coding identifies the 1:1 ratio spacer. Silver color coded kit. Kit parts are marked with a symbol (†). The ratio spacer is color coded to indicate ratio. To install the kit, disassemble the regulator, replace the existing spacer (3) and ratio piston (14) with the desired size, and reassemble. Do not mix spacers and pistons of different sizes. This is a ratio kit that must be purchased separately. Related to fluid regulators in Series A and IniFlex models.
Reference Manuals
- 344836 (Page 2) Low Flow Regulator
- 3A0427 (Page 11) Instructions-Parts Manual for Low Flow Fluid Regulator
