GRACO 24J358 - Husky 1590 (1.5" NPT) AL Pump, AL Center Section, SS Seats, PTFE Balls & PO Diaphragm
Industrial air-operated double diaphragm pump featuring aluminum construction for reliable performance in demanding industrial applications. This 1.5-inch pump delivers excellent chemical compatibility with PTFE balls and SST seats for handling aggressive fluids.
The Husky 1590 air-operated diaphragm pump features a patented, high-reliability closed center air valve that is online serviceable and an epoxy-coated air section for tough environmental conditions.
- Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps in its class
- Expanded material offering to handle endless applications
- Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump
- Offered in ATEX configuration.
- 1-1/2 in. (38.1 mm) ANSI end-porting
- High flow - 100 gpm (378 lpm) in a compact, portable size
- Fluid pressure to 120 PSI (8.4 bar, 0.84 MPa)
- Lube-free operation
- Available in polypropylene, aluminum and stainless steel
- Epoxy-coated air section for tough environmental conditions
Additional Specifications
- Material: Aluminum pump body, aluminum center section, stainless steel seats, PTFE balls
- Pump Size: 1.5 in
- Air Motor: AL
- Fluid Section: AL
- Seats: SST
- Diaphragm Type: overmolded diaphragms
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Ball Material | PTFE |
| Center Section Material | Aluminum |
| Compatible Material | Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer |
| Connection Type | Threaded |
| Diaphragm Material | PTFE Overmold |
| Fluid Inlet Size (in) | 1-1/2 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 1-1/2 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Material | Aluminum |
| Manifold Configuration | End Port |
| Manifold O-Ring Material | PTFE |
| Material | Aluminum |
| Maximum Air Consumption (SCFM) | 125 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 200 |
| Maximum Flow Rate (GPM) | 100 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Operating Temperature (°F) | 150 |
| Maximum Solid Size (in) | 0.1875 |
| Power Source | Air |
| Seat Material | Stainless Steel |
| Standards Met | ATEX, CE |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 33.5 |
Features
- Aluminum construction for durability
- PTFE balls for chemical compatibility
- Stainless steel seats for wear resistance
- NPT threaded connections
- Air-operated design eliminates electrical requirements
Applications
- Industrial fluid transfer
- Chemical processing
- General industrial pumping applications
Compatible Equipment
- Husky pump systems
- Industrial fluid handling systems
- Model DB3311
Related Parts
- 24J359
- 24B780
- 24G411
- 24B761
- 24B760
- 26D450
- DB3311
- 25A017
This is a complete pump assembly, not a kit. Temperature range 40°F to 180°F (4°C to 82°C). Complies to FDA21CFR 177.1550 (PTFE) safety standards. Refer to the Pump Matrix on page 24 to determine the Model No. of your pump This is an aluminum pump that is essentially the same as Model DB3311 but with different serial plate and some parts variations as referenced in a chart (chart not visible on this page)
Reference Manuals
