GRACO 24N094 - Husky 515 1/2" BSP PP Pump, PP Center Section, PP Seats, PTFE Balls & PO Diaphragm
Industrial-grade 0.5 inch polypropylene pump with polypropylene center section, polypropylene seats, PTFE balls, and BSPT threading. Features PTFE/EPDM overmolded diaphragms for superior chemical resistance and durability in demanding industrial applications.
The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.
- Center and end porting options.
- No mechanical seals to cause fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- Operates on as little as 20 PSI (1.4 bar, 0.14 MPa)
- Split manifold option to pump multiple fluids without mixing
- Delivery up to 15 gpm (56.7 lpm)
- Reliable air valve for years of dependable performance
Additional Specifications
- Material: Polypropylene body, PTFE balls, PTFE/EPDM overmolded diaphragms
- Pump Size: 0.5 in
- Air Motor: Poly
- Fluid Section: Poly
- Seats: Poly
- Diaphragm Type: overmolded
- Pump Model: 515
- Same As: D5B91
| Air Exhaust Port Size (in) | 3/8 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/4 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Ball Material | PTFE |
| Center Section Material | Polypropylene |
| Compatible Material | Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink |
| Connection Type | Threaded |
| Diaphragm Material | PTFE Overmold |
| Fluid Inlet Size (in) | 1/2 |
| Fluid Inlet Thread Type | BSPT |
| Fluid Outlet Size (in) | 1/2 |
| Fluid Outlet Thread Type | BSPT |
| Fluid Section Material | Polypropylene |
| Manifold Configuration | Center Port |
| Manifold O-Ring Material | PTFE |
| Material | Polypropylene |
| Maximum Air Consumption (SCFM) | 28 |
| Maximum Air Pressure (MPa) | 0.7 |
| Maximum Air Pressure (psi) | 100 |
| Maximum Cycle Rate (CPM) | 400 |
| Maximum Flow Rate (GPM) | 15 |
| Maximum Fluid Pressure (MPa) | 0.7 |
| Maximum Fluid Pressure (psi) | 100 |
| Maximum Operating Temperature (°F) | 150 |
| Maximum Solid Size (in) | 0.09375 |
| Minimum Operating Temperature (°F) | 40 |
| Overall Height (in) | 10.63 |
| Power Source | Air |
| Seat Material | Polypropylene |
| Standards Met | CE |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 6.5 |
Features
- PTFE/EPDM overmolded diaphragms for enhanced chemical compatibility
- Polypropylene construction for corrosion resistance
- PTFE balls for superior sealing performance
- Industrial-grade design for demanding applications
- 0.5 inch size suitable for moderate flow applications
Applications
- Industrial fluid transfer
- Chemical processing
- Corrosive fluid handling
- Manufacturing processes requiring chemical resistance
Compatible Equipment
- Husky pump series
- Industrial pumping systems
- Husky 515 pumps
Related Parts
- 24N093
- 24N095
- 24N096
- 24N097
- 24N098, D5B91
Part of GRACO's industrial pump line with PTFE/EPDM overmolded diaphragms. Temperature range: 40°F to 180°F (4°C to 82°C). FDA-Compliant PTFE and EPDM materials available in other models. Has overmolded diaphragm parts shown in table below (referenced table not visible on this page). Same as model D5B91 except for overmolded diaphragm parts.
Reference Manuals
