GRACO 24N095 - Husky 515 PVDF Pump PP Center Section, PVDF Seats, PTFE Balls & PTFE Overmolded Diaphragm
Industrial diaphragm pump component featuring PVDF construction for superior chemical resistance and durability in demanding industrial applications. Part of GRACO's Husky pump series designed for reliable fluid handling with PTFE overmolded diaphragms.
The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.
- Center and end porting options.
- No mechanical seals to cause fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- Operates on as little as 20 PSI (1.4 bar, 0.14 MPa)
- Split manifold option to pump multiple fluids without mixing
- Delivery up to 15 gpm (56.7 lpm)
- Reliable air valve for years of dependable performance
Additional Specifications
- Material: PVDF (Polyvinylidene Fluoride)
- Pump Size: 0.5 in
- Air Motor: Poly
- Pump Type: 515
- Same As: D55A1
- Diaphragm Type: overmolded
| Air Exhaust Port Size (in) | 3/8 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/4 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Ball Material | PTFE |
| Center Section Material | Polypropylene |
| Compatible Material | Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink |
| Connection Type | Threaded |
| Diaphragm Material | PTFE Overmold |
| Fluid Inlet Size (in) | 1/2 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 1/2 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Material | PVDF |
| Manifold Configuration | Center Port |
| Manifold O-Ring Material | PTFE |
| Material | PVDF |
| Maximum Air Consumption (SCFM) | 28 |
| Maximum Air Pressure (MPa) | 0.7 |
| Maximum Air Pressure (psi) | 100 |
| Maximum Cycle Rate (CPM) | 400 |
| Maximum Flow Rate (GPM) | 15 |
| Maximum Fluid Pressure (MPa) | 0.7 |
| Maximum Fluid Pressure (psi) | 100 |
| Maximum Operating Temperature (°F) | 225 |
| Maximum Solid Size (in) | 0.09375 |
| Minimum Operating Temperature (°F) | 40 |
| Overall Height (in) | 10.63 |
| Power Source | Air |
| Seat Material | PVDF |
| Standards Met | ATEX, CE |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 8.5 |
Features
- PVDF construction for excellent chemical resistance
- PTFE overmolded diaphragms for reliable performance
- Industrial-grade design for demanding applications
- Compatible with aggressive chemicals and solvents
Applications
- Industrial fluid transfer
- Chemical processing
- Corrosive fluid handling
- Manufacturing processes requiring chemical resistance
Compatible Equipment
- Husky 515 pumps
- 0.5 inch industrial diaphragm pumps
- Husky 515
Related Parts
- 24N093
- 24N094
- 24N096
- 24N097
- 24N098
- 24N257
- 24N258
- 24N259
- 24N260
- 24N261
Part of the Industrial Pumps with PTFE/EPDM Overmolded Diaphragms series. Temperature range: 40°F to 180°F (4°C to 82°C). Complies to FDA21CFR 177.1550 (PTFE) and FDA21CFR 177.2600 (EPDM) safety standards. Has overmolded diaphragm parts shown in table below (reference table not visible on this page). Same as D55A1.
Reference Manuals
