GRACO 24N258 - Husky 716 AL Pump, PP Center Section, SS Seats, PTFE Balls & PO Diaphragm
Industrial air-operated diaphragm pump with aluminum construction featuring stainless steel fluid section, designed for reliable pumping of various industrial fluids with PTFE/EPDM overmolded diaphragm technology
The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
- Center- and end-porting
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- 3/4 in (19.05 mm) center- and end-porting
- No seals to leak or fail
- Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Additional Specifications
- Material: Aluminum air motor, stainless steel fluid section
- Pump Size: 0.75 in
- Air Motor: Poly
- Fluid Section: AL
- Seats: SST
- Pump Type: 716
- Base Model: D5331
- Special Feature: overmolded diaphragm
| Air Exhaust Port Size (in) | 3/8 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/4 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Ball Material | PTFE |
| Center Section Material | Polypropylene |
| Compatible Material | Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink |
| Connection Type | Threaded |
| Diaphragm Material | PTFE Overmold |
| Fluid Inlet Size (in) | 3/4 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 3/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Material | Aluminum |
| Manifold Configuration | Center Port |
| Manifold O-Ring Material | PTFE |
| Material | Aluminum |
| Maximum Air Consumption (SCFM) | 28 |
| Maximum Air Pressure (MPa) | 0.7 |
| Maximum Air Pressure (psi) | 100 |
| Maximum Cycle Rate (CPM) | 400 |
| Maximum Flow Rate (GPM) | 16 |
| Maximum Fluid Pressure (MPa) | 0.7 |
| Maximum Fluid Pressure (psi) | 100 |
| Maximum Operating Temperature (°F) | 225 |
| Maximum Solid Size (in) | 0.09375 |
| Minimum Operating Temperature (°F) | 40 |
| Overall Height (in) | 10.43 |
| Power Source | Air |
| Seat Material | Stainless Steel |
| Standards Met | ATEX, CE |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 8.5 |
Features
- PTFE/EPDM overmolded diaphragms for chemical compatibility
- Aluminum air motor construction for durability
- Stainless steel fluid section for corrosion resistance
- PTFE balls for excellent chemical resistance
- Stainless steel seats for long service life
- NPT threaded connections for easy installation
Applications
- Industrial fluid transfer
- Chemical processing
- General industrial pumping applications
- Applications requiring chemical resistant materials
Compatible Equipment
- Husky industrial pump systems
- Husky 716
Related Parts
- 24N093
- 24N094
- 24N095
- 24N096
- 24N097
- 24N098
- 24N257
- 24N259
- 24N260
- 24N261
Part of the industrial pump series with PTFE/EPDM overmolded diaphragms, suitable for demanding industrial applications requiring chemical compatibility Has overmolded diaphragm parts shown in table below (though the referenced table is not visible on this page)
Reference Manuals
