GRACO 24N259 - Husky 716 AL Pump, PP Center Section, SS Seats, SS Balls & PO Diaphragm
Industrial-grade air-operated double diaphragm pump featuring aluminum construction with stainless steel fluid section components and PTFE seals for reliable chemical processing applications
The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
- Center- and end-porting
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- 3/4 in (19.05 mm) center- and end-porting
- No seals to leak or fail
- Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Additional Specifications
- Material: Aluminum air motor, aluminum fluid section, stainless steel seats and balls, PTFE seals
- Pump Size: 0.75 in
- Pump Type: 716
- Same As: D5333
- Diaphragm Type: overmolded
| Air Exhaust Port Size (in) | 3/8 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/4 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Ball Material | 316 Stainless Steel |
| Center Section Material | Polypropylene |
| Compatible Material | Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink |
| Connection Type | Threaded |
| Diaphragm Material | PTFE Overmold |
| Fluid Inlet Size (in) | 3/4 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 3/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Material | Aluminum |
| Manifold Configuration | Center Port |
| Manifold O-Ring Material | PTFE |
| Material | Aluminum |
| Maximum Air Consumption (SCFM) | 28 |
| Maximum Air Pressure (MPa) | 0.7 |
| Maximum Air Pressure (psi) | 100 |
| Maximum Cycle Rate (CPM) | 400 |
| Maximum Flow Rate (GPM) | 16 |
| Maximum Fluid Pressure (MPa) | 0.7 |
| Maximum Fluid Pressure (psi) | 100 |
| Maximum Operating Temperature (°F) | 225 |
| Maximum Solid Size (in) | 0.09375 |
| Minimum Operating Temperature (°F) | 40 |
| Overall Height (in) | 10.43 |
| Power Source | Air |
| Seat Material | Stainless Steel |
| Standards Met | ATEX, CE |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 8.5 |
Features
- PTFE/EPDM overmolded diaphragms
- Aluminum construction for durability
- Stainless steel fluid contact components
- NPT threaded connections
- Air-operated double diaphragm design
Applications
- Industrial chemical processing
- Chemical transfer applications
- Applications requiring corrosion-resistant materials
Compatible Equipment
- Industrial air systems
- Chemical processing equipment
- Husky 716 pumps
Related Parts
- 24N093
- 24N094
- 24N095
- 24N096
- 24N097
- 24N098
- 24N257
- 24N258
- 24N260
- 24N261
Part of GRACO's industrial pump series with PTFE/EPDM overmolded diaphragms, designed for chemical compatibility and industrial durability Has overmolded diaphragm parts shown in table below (table not visible on this page). Same as D5333 except for overmolded diaphragm parts.
Reference Manuals
