GRACO 24N262 - Husky 716 SS Pump, PP Center Section, SS Seats, SS Balls & PO Diaphragm
Industrial diaphragm pump component featuring stainless steel construction with PTFE seats and balls for reliable chemical handling in demanding industrial applications. Part of GRACO's Husky pump series designed for aggressive fluid transfer with superior chemical compatibility.
The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
- Center- and end-porting
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- 3/4 in (19.05 mm) center- and end-porting
- No seals to leak or fail
- Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Additional Specifications
- Material: SST (Stainless Steel) with PTFE
- Pump Size: 0.75 in
- Air Motor: Poly
- Fluid Section: SST
- Seats: SST
- Balls: SST
- Pump Model: 716
- Same As: D5433
- Diaphragm Type: overmolded
| Air Exhaust Port Size (in) | 3/8 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/4 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Ball Material | 316 Stainless Steel |
| Center Section Material | Polypropylene |
| Compatible Material | Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink |
| Connection Type | Threaded |
| Diaphragm Material | PTFE Overmold |
| Fluid Inlet Size (in) | 3/4 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 3/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Material | Stainless Steel |
| Manifold Configuration | Center Port |
| Manifold O-Ring Material | PTFE |
| Material | Stainless Steel |
| Maximum Air Consumption (SCFM) | 28 |
| Maximum Air Pressure (MPa) | 0.7 |
| Maximum Air Pressure (psi) | 100 |
| Maximum Cycle Rate (CPM) | 400 |
| Maximum Flow Rate (GPM) | 16 |
| Maximum Fluid Pressure (MPa) | 0.7 |
| Maximum Fluid Pressure (psi) | 100 |
| Maximum Operating Temperature (°F) | 225 |
| Maximum Solid Size (in) | 0.09375 |
| Minimum Operating Temperature (°F) | 40 |
| Overall Height (in) | 10.43 |
| Power Source | Air |
| Seat Material | Stainless Steel |
| Standards Met | ATEX, CE |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 18 |
Features
- Stainless steel construction for corrosion resistance
- PTFE seats and balls for chemical compatibility
- NPT threaded connections
- 0.75 inch pump size for medium flow applications
- Overmolded diaphragm design for reliability
Applications
- Industrial chemical transfer
- Aggressive fluid handling
- Chemical processing applications
- Corrosive liquid pumping
Compatible Equipment
- GRACO Husky pump series
- 0.75 inch industrial pump systems
- Husky 716
Related Parts
- 24N093
- 24N094
- 24N095
- 24N096
- 24N097
- 24N098
- 24N257
- 24N258
- 24N259
- 24N260
Part of the industrial pump series with PTFE/EPDM overmolded diaphragms. Temperature range: 40°F to 180°F (4°C to 82°C). FDA-Compliant materials available in separate product line. Has overmolded diaphragm parts shown in table below (reference table not visible on this page)
Reference Manuals
