GRACO 24Z834 Carbon Steel T3 Transfer Pump
Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco’s proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required.
- Easier to maneuver - The overall height of the T3 is 3.7 inches (9.4 cm) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig.
- More quiet – Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump.
- Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switchingis purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanicalreversing mechanism in the air-motor
Specifications:
| Air Inlet Size (in) | 1/4 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Compatible Material | Polyurethane Foam, Polyurea |
| Fluid Outlet Size (in) | 3/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Material | Carbon Steel |
| Maximum Air Inlet Pressure (MPa) | 0.69 |
| Maximum Air Inlet Pressure (psi) | 100 |
| Maximum Flow Rate (GPM) | 4.5 |
| Maximum Operating Temperature (°F) | 190 |
| Maximum Working Pressure (MPa) | 2.2 |
| Maximum Working Pressure (psi) | 315 |
| Pump Ratio | 3:1 |
| Sound Power Level (dB(A)) | 82.8 |
| Type | Pneumatic Piston Pump |
| Weight (lb) | 22 |
| Wetted Material | Carbon Steel, Stainless Steel, PTFE |
