GRACO 25C464 - 3" Quick Clamp Flange Mount Motor ATEX
Optional Gear Reducer for hazardous location approved combinations
Low shear, electric, direct drive agitator mixes and maintains suspension of industrial coatings stored in fluid tanks. This 3" Quick-clamp Flange Mount Motor does not come with shaft or impeller.
For advanced control and energy savings, switch to electric agitators.
- Electric agitators are up to 5 times more efficient than pneumatic agitators
- Speed remains constant, regardless of material level in tank
- Low shear mixing ensures uniform particle dispersion without material degradation
- Quiet motor improves work environment with a sound pressure level of less than 75 dBA
Additional Specifications
- Outside Diameter: 3 inches
- Frequency: 50 Hz
- Drive Type: Direct Drive
- Mount Type: Quick-clamp Flange Mount
- Motor Type: ATEX Listed Explosion Proof Inverter Duty Motor
- Certification: CML 24ATEX6027X, IECEx CML 24.0020X
- Temperature Range: 0°C ≤ Tamb ≤ 40°C
- Hazardous Location Approval: CE 2575
- Explosion Protection: II 1/2 G Ex h IIB T4 Ga/Gb
| For Use With | 36 inch diameter or wide container |
| Includes | Motor, Flange |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Speed (RPM) | 500 |
| Maximum Viscosity (cP) | 300 |
| Minimum Operating Temperature (°F) | 32 |
| Motor Type | Electric |
| Power Rating (HP) | 0.75 |
| Power Rating (kW) | 0.37 |
| Type | Agitator |
| Weight Range (lb) | 55-65 |
| Wetted Material | Stainless Steel |
Compatible Equipment
- Variable frequency drive (VFD)
- Electric Direct Drive Agitator
- Shaft options 17P005, 17P006, 17P007, 17P008, 17P009, 17P010
- Impeller 17N704
Related Parts
- 25C453
- 25C575
- 25C576
- 25C454
- 25C463
- 25C462
- 25C465
- 25C470
- 25C472
- 25C471
This is part of the 50 Hz Direct Drive agitator family. Related parts include other flange mount motors, OD flange mount motors, and pressure tank agitator assemblies in various gallon capacities. Does not come with shaft or impeller. See Shaft and Impeller Size, page 9, for proper shaft length and impeller diameter part numbers, to be ordered separately. Requires power from a variable frequency drive (VFD) to control speed and is not to be used without one. See manual 3A4793 for VFD controls part numbers. Optional 4.8 to 1 gear reducer kits available. This is an optional gear reducer that can be used with or without approved agitator assemblies for hazardous locations. Compatible with multiple shaft options and impeller 17N704.
Reference Manuals
