GRACO 25F224 - Pressure Feed Kit - 0.030", 20 PSI

Specifications

• Max Working Pressure: 5-20 PSI (0.035-0.14 MPa, 0.35-1.4 bar)
• Fluid Cartridge Nozzle Size: 0.03 (0.8) in. (mm)
• Orifice Size: 0.030 in. (0.8 mm)
• Recommended Viscosity: light 5-15 centipoise
• Typical Flow Rate: 4-10 oz/min (0.12-0.30 l/min)
• Construction: SST Nozzle, PEEK Tip

Compatible Equipment

• 25F163 - Stellair Automatic Conventional Air Spray Gun, General Industry, .030" Nozzle
• 25F181 - Stellair Automatic Air Spray Gun (Base Model, Requires Specific Nozzle/Cap Setup)
• 25F167 - Stellair Automatic Conventional Gun w/ Fluid Control Knob, General Industry, .030" Nozzle

Related Parts

• 25F233 - Kit, Nozzle, Adhesives, .051, 20 PSI
• 25F222
• 25F225 - Pressure Feed Kit - 0.042", SST Nozzle, 20 PSI
• 25F226 - Kit, Pressure Feed, .055
• 25F227 - Pressure Feed Kit - 0.070", 20 PSI
• 25F228
• 25F229
• 25F234 - 0.070" Adhesive Nozzle Kit, Stainless Steel, 20 PSI

This is a Nozzle Only Kit with 0.03 inch (0.8 mm) fluid cartridge nozzle size, part of kit number 2004191 This is a nozzle kit (2a) used with spray guns that have 0.030 inch orifice size. Compatible with both General Industry HVLP, General Industry Conventional, and General Industry Compliant application types. Part of fluid cartridge kit 2000501. For low flow rates or light viscosity fluid applications. Use with needle fully triggered at specified fluid pressure range.

Reference Manuals

• 3B0141 (Page 26) Stellair Air Spray Gun
• 407194 (Page 32) Stellair Auto Air Spray Gun