GRACO 25F225 - Pressure Feed Kit - 0.042", SST Nozzle, 20 PSI
Specifications
- Max Working Pressure: 5-20 PSI (0.035-0.14 MPa, 0.35-1.4 bar)
- Material: SST Nozzle, PEEK Tip
- Orifice Size: 0.042 in. (1.1 mm)
- Kit Designation: 2a
- Recommended Viscosity: light-medium 15-30 centipoise
- Typical Flow Rate: 8-14 oz/min (0.24-0.42 l/min)
- Construction: SST Nozzle, PEEK Tip
Compatible Equipment
- 25F171 - General Industry: HVLP
- 25F170 - General Industry: HVLP
- 25F168 - General Industry: Conventional
- 25F175 - General Industry: HVLP
- 25F178 - General Industry: Compliant
- 25F182 - General Industry: Compliant
Related Parts
- 25F224 - Nozzle Kit (2a) for 0.030 orifice
- 25F226 - Nozzle Kit (2a) for 0.055 orifice
- 25F227 - Nozzle Kit (2a) for 0.070 orifice
- 25F233
- 25F234
- 2000502 - Fluid Cartridge Kit
- 25F224 - General Industry Nozzle Kit
- 25F226 - Medium viscosity Nozzle Kit
- 25F227 - Medium-heavy viscosity Nozzle Kit
This is a nozzle kit component used in various spray gun repair kits. It corresponds to models with 0.042 inch orifice size. This is a nozzle kit designated as '2a' that is compatible with the 25F208 Air Brush Conventional spray gun model Use fluid nozzle that will achieve required flow with needle fully triggered at fluid pressure of 5-20 PSI. For low flow rates or light viscosity fluid, select smaller nozzle sizes. For high flow rates or high viscosity fluid, select larger nozzle sizes.
Reference Manuals