GRACO 25M415 - SDM8 Metered Dispense Valve for Windshield Wash Applications - 1/2" NPT, Rigid Open Extension
SDM Model - 1/2 NPT, Rigid open extension, None nozzle, WWS fluid
Graco’s premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.
Large, Intuitive Display—high-contrast display for low and bright light conditions
Long valve life—cartridge spool valve specifically designed to reduce wear and reduce costly down time
Ergonomic—four-finger trigger and easy-to-use button pad reduce worker fatigue
Reliable—time-tested Graco engineering
Durable - Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
Long battery life—uses 4 AA easy-to-replace batteries
Additional Specifications
- Pulse Model: 25M328
- Sdm Model: 25M415
- Extension: Rigid, open
- Nozzle: None
- Fluid: WWS (Windshield Washer Solvent)
- Max Flow Rate Lpm: 30
- Max Volumetric Flow Rate Lpm: 30
| Compatible Material | Windshield Washer Fluid |
| Dispense Type | Manual |
| Display Type | Electronic |
| Extension Type | Rigid |
| Fluid Inlet Thread Gender | Female |
| Fluid Outlet Thread Gender | Female |
| Includes | WWS Extension |
| Inlet Size (in) | 1/2 |
| Inlet Thread Type | NPT |
| Maximum Flow Rate (GPM) | 8 |
| Maximum Operating Temperature (°F) | 158 |
| Maximum Recorded Dispense | 9999 |
| Maximum Storage Temperature (°F) | 158 |
| Maximum Working Pressure (MPa) | 10.3 |
| Maximum Working Pressure (psi) | 1500 |
| Meter Accuracy (%) | ±0.5 |
| Meter Technology | Oval Gear |
| Metering Gun Weight (lb) | 5.3 |
| Minimum Flow Rate (GPM) | 0.25 |
| Minimum Operating Temperature (°F) | 4 |
| Nozzle Type | Rigid |
| Outlet Thread Type | Straight Thread O-Ring Boss |
| Overall Height (in) | 5.75 |
| Overall Length (in) | 13 |
| Overall Width (in) | 3.75 |
| Recommended Environment | Indoor |
| Trigger Lock | Non-Locking |
| Trigger Protection Type | Guard |
| Type | Electronic Metered Dispense Valve |
| Unit of Measure | Quart, Pint, Gallon, Liter |
| Valve Type | Metered |
| Warranty | 5 Years Structural Components, 3 Years Electronics, 1 Year Wear Parts |
| Wetted Material | Aluminum, Stainless Steel, PBT/PC, Zinc, Nitrile Rubber, CS |
Compatible Equipment
- Windshield Wash Applications
Related Parts
- 25M328
- 25M404 - SDM8 Series Electronic Manual Oil Meter - Rigid Extension - 1/2" Inlet
- 25M405 - SDM8 Series Electronic Manual Antifreeze Meter - Rigid Extension - 1/2" Inlet
- 25M406 - SDM8 Series Electronic Manual Oil Meter - Flexible Extension - 1/2" Inlet
- 25M407 - SDM8 Series Electronic Manual Antifreeze Meter - Flexible Extension - 1/2" Inlet
- 25M410 - SDM18 Series Electronic Manual Oil/Antifreeze Meter - Rigid Extension - 1/2" Inlet
- 25M411 - SDM18 Series Electronic Manual Oil/Antifreeze Meter - Flexible Extension - 1/2" Inlet
- 25M413 - SDM8 Series Electronic Manual Gear Lube Meter - Rigid Extension - 1/2" Inlet
- 25M416 - SDM18 Series Electronic Manual Oil/Antifreeze Meter - Rigid Extension - 3/4" Inlet
- 25M417 - SDM18 Series Electronic Manual Oil/Antifreeze Meter - Flexible Extension - 3/4" Inlet
This is an SDM (presumably Sealed Dispense Module) model with rigid open extension design, no nozzle, for windshield washer solvent (WWS) applications. Note that there is no corresponding SDP model listed (N.A. in that column). This is part of the 25M series models. WWS = Windshield Washer Solvent as noted at bottom of page.
Reference Manuals
- 3A5413 (Page 5) -Pulse, SDP and SDM Metered Dispense Valve Repair manual, Service Instructions
- 3A6711 (Page 6) SDM8 and SDM18 Metered Dispense Valves Instructions
