GRACO 25N634 - G-FORCE II 3325 HA-DD Pressure Washer, 3300 PSI, 2.5 GPM w/ Honda Engine & AR Pump
Ideal for remodelers & property maintenance cleaning needs, the G-Force II 3325 HA-DD pressure washer is the best choice for medium duty applications. It's light, compact, provides everyday reliability and is the perfect choice when you need consistent reliability for the occasional cleaning job.
- Honda® Engine
- Reliable, powerful & easy-to-start
- Oil Alert shuts down engine to prevent damage if oil level drops too low
- Thermal sensor prevents pump from overheating in bypass mode
- Reliable, AR Triplex Plunger Water Pump
- 100% Heavy-Gauge Aluminum Frames
- Up to 40% lighter than steel frames
- Corrosion resistant to water and chemicals
- Standard on all Graco models
- Lifetime Warranty
- EZ Start Pressure Relief For Easier Starting
- Standard Graco feature
- Allows water bypass pump to eliminate pressure build-up in the system
- No need to pull the gun trigger while starting the washer
- Direct Drive
- Compact design with fewer components and lighter weight
- Pump is connected directly to the drive shaft of the engine
- Pump rpm matches that of the engine (usually around 3500 rpm)
Includes:
- Professional-Grade Pressure Washer Spray Gun with Quick Connects
- 36 in Pressure Washer Wand with Quick Connect
- 3/8 in x 50 ft Non-Marking Pressure Washer Hose
- 4 ft Chemical Injector Hose with Strainer
- 0° Red Pressure Washer Tip
- 15° Yellow Pressure Washer Tip
- 25° Green Pressure Washer Tip
- Black Chemical Pressure Washer Tip
Specifications
| ENGINE BRAND |
Honda |
| ENGINE MODEL |
GX200 |
| FUEL TANK CAPACITY (L) |
3.6 |
| FUEL TANK CAPACITY (QT) |
3.8 |
| HOSE INLET DIAMETER (CM) |
0.9525 |
| HOSE INLET DIAMETER (IN) |
3/8 |
| HOSE INLET DIAMETER (MM) |
9.525 |
| HOSE LENGTH (CM) |
1524 |
| HOSE LENGTH (FT) |
50 |
| HOSE LENGTH (M) |
15.2 |
| HOSE LENGTH (MM) |
15240 |
| MAXIMUM FLOW RATE (GPM) |
2.5 |
| MAXIMUM FLOW RATE (L/MIN) |
9.46 |
| MAXIMUM FLUID PRESSURE (BAR) |
227.5 |
| MAXIMUM FLUID PRESSURE (KPA) |
22750 |
| MAXIMUM FLUID PRESSURE (PSI) |
3300 |
| MAXIMUM OPERATING TEMPERATURE (°C) |
63 |
| MAXIMUM OPERATING TEMPERATURE (°F) |
145 |
| MAXIMUM WORKING PRESSURE (BAR) |
227 |
| MAXIMUM WORKING PRESSURE (KPA) |
22700 |
| MAXIMUM WORKING PRESSURE (PSI) |
3300 |
| MODEL |
G-Force II |
| MOTOR DRIVE TYPE |
Direct Drive |
| PUMP BRAND |
AR |
| PUMP TYPE |
Triplex Plunger |
| RECOMMENDED WEEKLY USAGE (HOURS) |
10-20 |
| SERIES |
3325 |
| TYPE |
Gas Pressure Washer |
| WEIGHT (KG) |
26 |
| WEIGHT (LB) |
57 |
| MAXIMUM WORKING PRESSURE (MPA) |
22.7 |
Compatible Equipment
- G-FORCE II series pressure washers
- Direct-Drive pressure washer systems
- 25N634
- 25N635
- 25N636
- 25N637
Related Parts
- 25N638
- 25N635
- 25N639
- 25N636
- 25N640
- 25N637
- 25N641
- 25N677
- 25N681, 25N677K
This is a 3325 model pressure washer with Honda engine, AR pump, and direct drive system. The model naming convention shows: 33=3300 PSI pressure rating, 25=2.5 GPM flow rate, H=Honda engine, A=AR pump, DD=Direct Drive system. This is a model number for a direct-drive pressure washer system. The page shows exploded view parts diagram with numbered components (1-30) but does not provide specific specifications for the 25N634 model itself. All parts shown in the diagram would be compatible with this model. 25N634 is listed as one of the main models in this Direct-Drive parts list series. It appears in various component compatibility lists throughout the manual including: GX200 engine compatibility, base plate frame compatibility, wheel/tire compatibility, safety label compatibility, foot bracket compatibility, and nozzle compatibility (uses 0° red 2.7 nozzle and 15° yellow 2.7 nozzle). Also compatible with thermal valve part 17A562.
Reference Manuals
