GRACO 25T817 - EGP On-Demand Pump, 115 VAC, 3.7 gpm, 500 PSI
GRACO 25T817 EGP On-Demand Pump delivers efficient fluid handling with flow-on-demand technology. This 115 VAC electric pump provides 3.7 GPM smooth fluid flow for critical equipment applications. Features heavy-duty motor with long life, built-in fluid bypass valve for pump protection, and plug-and-play design for easy installation. Ideal for workshops, mobile trucks, and remote locations where consistent pressure and energy-efficient operation are essential.
Choose cost-saving convenience with the all-new Graco EGP electric pumps. Install the EGP on-demand pump to replace traditional pneumatic pumps and reduce operating costs. These pumps offer the same powerful, high-quality performance you’ve come to expect from Graco — only for less operating cost and more convenience.
Install the EGP On-Demand Pump in a variety of applications including workshops, mobile trucks and industrial plants. Use it as an energy-efficient option to standard pneumatic pumps.
- Electrical Flexibility - Available in 12 VDC and 115 VAC power options.
- Smooth Fluid Flow 4 gpm (15 lpm) - Output flow is continuous and non-pulsating up to 4 gpm (15 lpm).
- Heavy-Duty Motor with Long Life - Industrial-grade electric motors with over-temperature protection on 115 VAC models.
- Fluid Flow When Needed - On-demand pressure sensing technology starts and stops the pump during the dispense.
- Pump Reliability - Internal inlet and outlet checks keep pump section flooded to maintain prime for reliable performance.
- Simultaneous Dispenses - Pump long distances and supply fluid to multiple dispense points.
Additional Specifications
- Flow Rate: 3.7 GPM (14.0 LPM)
- Length: 16.7 inches (421.2 mm)
- Max Working Pressure: 500 PSI (34.5 bar)
- Frequency: 60 Hz
- Motor Type: TEM
- Maximum Suction Lift: 1.4 m
- Maximum Free Flow: 3.7 (14.0)
- Automatic Relief Setting: 500 (34.5)
- Inlet: 3/4 in NPT
- Outlet: 1/2 in NPT
- Weight: 36 (16.3)
- Dispense Opening: 133376
- Suction Kit: 133375
- Pump Type: Electric Gear Pump
- Height: 9.67 inches (245.6 mm)
- Width: 8.9 inches (226.1 mm)
| Compatible Material |
Oil |
| Fluid Pressure Control Type |
Internal Bypass, Electrical Pressure Shut Off Switch |
| Inlet Thread Gender |
Female |
| Inlet Thread Size (in) |
0.75 |
| Inlet Thread Type |
NPT |
| Maximum Current (A) |
14.4 |
| Maximum Flow Rate (GPM) |
4 |
| Maximum Speed (RPM) |
1750 |
| Maximum Working Pressure (psi) |
500 |
| Outlet Thread Gender |
Female |
| Outlet Thread Size (in) |
0.5 |
| Outlet Thread Type |
NPT |
| Overall Depth (in) |
12.5 |
| Overall Height (in) |
8 |
| Overall Width (in) |
6.75 |
| Power Rating (HP) |
1.5 |
| Power Type |
Electric |
| Type |
Gear Pump |
| Voltage (V ac) |
115 |
| Weight (lb) |
36 |
| Wetted Parts |
Zinc-Plated Carbon Steel, Stainless Steel, Galvanized Steel, Aluminum, Nitrile Rubber |
Features
- Flow-on-demand pressure sensing technology
- Heavy-duty motor with long life and over-temperature protection
- Built-in fluid bypass valve protects pump and downstream components
- Smooth fluid flow without pulsation
- Self-priming, precision-machined pump design
- Plug and play installation
Applications
- Workshop applications including mobile trucks and remote locations
- Petroleum and synthetic-based oils (motor, gear and ATF)
- Waste oil
- Antifreeze
- Hydraulic fluids
- Cutting oils
Compatible Equipment
- 115 VAC EGP On-Demand Pump
Related Parts
- 25T819
- 25T820
- 25T822
- 25T846
- 25T818
Part of GRACO's EGP On-Demand Pump family. Includes carbon steel with zinc plating, stainless steel, galvanized steel, aluminum, nitrile, rubber wetted parts. Manual part number 3A8570. For pumping non-flammable fluids, including motor oils and hydraulic fluid only. Do not use to pump water. For professional use only. Not approved for use in explosive atmospheres or hazardous (classified) locations. Dimensions provided for Length (A), Height (B), and Width (C) as shown in the technical drawings
Reference Manuals
