GRACO 25T818 - EGP On-Demand Pump, 12 VDC, 3.8 gpm, 325 PSI
GRACO EGP On-Demand Pump delivers efficient fluid handling with electric operation and on-demand pressure sensing technology. This 12 VDC pump provides smooth fluid flow of 4 GPM (15 LPM) and starts/stops automatically when needed. Features industrial-grade electric motor with over-temperature protection, built-in fluid bypass valve, and plug-and-play design for easy installation.
Choose cost-saving convenience with the all-new Graco EGP electric pumps. Install the EGP on-demand pump to replace traditional pneumatic pumps and reduce operating costs. These pumps offer the same powerful, high-quality performance you’ve come to expect from Graco — only for less operating cost and more convenience.
Install the EGP On-Demand Pump in a variety of applications including workshops, mobile trucks and industrial plants. Use it as an energy-efficient option to standard pneumatic pumps.
- Electrical Flexibility - Available in 12 VDC and 115 VAC power options.
- Smooth Fluid Flow 4 gpm (15 lpm) - Output flow is continuous and non-pulsating up to 4 gpm (15 lpm).
- Heavy-Duty Motor with Long Life - Industrial-grade electric motors with over-temperature protection on 115 VAC models.
- Fluid Flow When Needed - On-demand pressure sensing technology starts and stops the pump during the dispense.
- Pump Reliability - Internal inlet and outlet checks keep pump section flooded to maintain prime for reliable performance.
- Simultaneous Dispenses - Pump long distances and supply fluid to multiple dispense points.
Additional Specifications
- Flow Rate: 3.8 GPM (14.4 LPM)
- Length: 13.43 inches (341.1 mm)
- Max Working Pressure: 325 PSI (22.4 bar)
- Voltage: 12 VDC
- Horsepower: 3/4 HP
- Maximum Pressure: 325 PSI (22.4 bar)
- Automatic Relief Setting: 325 PSI (22.4 bar)
- Inlet: 3/4 in NPT
- Outlet: 1/2 in NPT
- Height: 9.67 inches (245.6 mm)
- Width: 9.5 inches (241.3 mm)
| Compatible Material | Oil |
| Fluid Pressure Control Type | Internal Bypass, Electrical Pressure Shut Off Switch |
| Inlet Thread Gender | Female |
| Inlet Thread Size (in) | 0.75 |
| Inlet Thread Type | NPT |
| Maximum Current (A) | 60 |
| Maximum Flow Rate (GPM) | 3 |
| Maximum Speed (RPM) | 1750 |
| Maximum Working Pressure (psi) | 325 |
| Outlet Thread Gender | Female |
| Outlet Thread Size (in) | 0.5 |
| Outlet Thread Type | NPT |
| Overall Depth (in) | 12.5 |
| Overall Height (in) | 8 |
| Overall Width (in) | 6.75 |
| Power Rating (HP) | 0.75 |
| Power Rating (W) | 600 |
| Power Type | Electric |
| Type | Gear Pump |
| Weight (lb) | 36 |
| Wetted Parts | Zinc-Plated Carbon Steel, Stainless Steel, Galvanized Steel, Aluminum, Nitrile Rubber |
Features
- On-demand pressure sensing technology starts and stops pump automatically
- Smooth fluid flow without pulsation
- Heavy-duty motor with long life and over-temperature protection
- Fluid flow when needed - energy efficient operation
- Pump reliability with internal part and outlet checks
- Built-in fluid bypass valve protects pump and downstream components
Applications
- Petroleum and synthetic-based oils (motor, gear and ATF)
- Waste oil
- Antifreeze
- Hydraulic fluids
- Cutting oils
- Non-flammable oil-based solvents
Compatible Equipment
- 12 VDC EGP On-Demand Pump
Related Parts
- 25T819
- 25T820
- 25T822
- 25T846
- 25T817
Part of EGP On-Demand Pump family. Pump can handle long distances and supply fluid to multiple dispense points. Dispense kit and suction kit available separately. For pumping non-flammable fluids, including motor oils, hydraulic fluid, and antifreeze. Do not use to pump water. For professional use only. Not approved for use in explosive atmospheres or hazardous (classified) locations. Dimensions shown are Length (A), Height (B), and Width (C) as illustrated in the technical drawings above the table
Reference Manuals
