GRACO 262375 - SmartWare Shot Dispense Kit for Pumps w/ Large NXT Air Motor

SmartWare Shot Dispense Kit for pumps with a large NXT Air Motor provides accurate, economical material dosing that saves time, material, and labor costs. Uses sensor technology to track pump position for flowmeter-like accuracy without requiring flowmeters or gear meters in the fluid stream. Features sequence capability allowing up to 14 different shot sizes and a shot mode for single shot size display with amount communication.

What You Need to Pair This With

This is a retrofit kit that converts an existing pump into a metered dosing system. It does not include a pump or air motor.

• Requires a Check-Mate or Dura-Flo pump in a wall mount or floor stand configuration with an NXT2200 or larger air motor
• The kit supplies its own linear sensor, magnet, and reed switch and installs onto a standard motor, so no sensor-ready motor is required
• Pump and motor are configured to order rather than sold as a single part number; see GRACO manuals 312376 (Check-Mate packages), 312375 (Check-Mate pumps), 311827 or 311825 (Dura-Flo pumps), 311828 or 311826 (Dura-Flo packages), and 311238 or 312796 (NXT air motors)
• For ram-mounted supply systems (D200, D60, S20, or D200S), use the matching kit listed under Related Parts instead

Specifications

• Shot Size Range: 6 cc to 1 gal (3.785 L)
• Accuracy: 0.25 to 4%, depending on material and shot size
• Power Requirements: 110 or 220 VAC
• Air Motor Compatibility: NXT2200 and larger air motors
• Mounting Type: Wall mount or floor stand pump
• Manual: 3A0294

Features

• Accurate dosing without flowmeters or gear meters
• Linear sensor tracks pump position
• Sequence capability for up to 14 different shot sizes
• Shot mode displays single shot size and communicates amount dispensed
• Local Control Module with display
• Pressure sensor ensures accurate dispense

Applications

• Cartridge fill
• Potting
• Encapsulating
• Mold making
• Batching or kitting

Related Parts

• 262370 - for D200 & D60 w/ Large NXT Air Motor
• 262371 - for D200 w/ Small NXT Air Motor
• 262372 - for D200S w/ Large NXT Air Motor
• 262373 - for S20 w/ Large NXT Air Motor
• 262374 - for S20 w/ Small NXT Air Motor

Kit Contents (29-Piece Installation Kit)

• Electronics Subassembly Bracket
• Local Control Module Bracket Subassembly
• Electronics Subassembly Cover
• Local Control Module (GCA)
• MAC Valve Subassembly
• CAN Cable, Male/Female, 0.4m
• DB25 Cable Assembly, 10 ft
• Linear Motor Sensor Pigtail Cable, M12
• M12 Cable, 8 Pin, M/F, 3.0m
• GCA Solenoid Extension Cable, M12-5P (Qty 3)
• Solenoid Cable (Qty 2)
• Splitter Connector (Qty 2)
• Linear Sensor Magnet
• Power Cord
• Smart Pump Label Specs Document
• Sensor Assembly
• Lift Ring Adapter, 1-9/16 SST
• Overmolded Reed Switch Sensor
• O-Ring Packing (Qty 2)
• Anaerobic Adhesive
• Hex Washer Head Machine Screw
• Thread Forming Screw
• Strain Relief Guide
• Magnet Installation Tool

Handles a wide range of materials and viscosities, from paint to roof tar, providing accurate metered dispensing of one-component materials. Part of the SmartWare technology system. Shut off the air supply to the system before installation. For professional use only. Not approved for use in European explosive atmosphere locations.

Reference Manuals

• 340648 (Page 2) SmartWare Technology
• 3A0294 (Page 1) SmartWare Shot Dispense